Home Network Community > All Threads > Not seeing all the tabs on the UI
< All Threads

Not seeing all the tabs on the UI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not seeing all the tabs on the UI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not seeing all the tabs on the UI
Not seeing all the tabs on the UI
2022-01-11 17:44:30 - last edited 2022-01-12 07:50:55
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.1.0.0.9.1

Hi there ! I have recently bought a Archer mr 600 and logged into the management app of the mr600 ! The problem is that there are missing tabs such as internet and firmware upgrade ! Any help to get the full UI on the management site ? 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Not seeing all the tabs on the UI -Solution
2022-01-11 21:01:58 - last edited 2022-01-12 07:50:55

@T-Man22 

 

If you want to have a full device management experience better use a web brwoser to access the device's WebGUI:

Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1 (that's the MR600 default LAN IP address).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Not seeing all the tabs on the UI -Solution
2022-01-11 21:01:58 - last edited 2022-01-12 07:50:55

@T-Man22 

 

If you want to have a full device management experience better use a web brwoser to access the device's WebGUI:

Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1 (that's the MR600 default LAN IP address).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Not seeing all the tabs on the UI
2022-01-12 15:08:44

@terziyski : I am logging into the specific WEB GUI of the device ! I am located in south africa . So im thinking that the specific settings are begin disabled  ? 

 

I woulf like the change bands and play around to get te best possible speeds ! But im currently facing this problem ! 

 

The downloade speed is 75mbs wich is good  and upload 5mbs wich is low ! 

 

This is on 4g not 4g+ 

 

 

  0  
  0  
#3
Options
Re:Not seeing all the tabs on the UI
2022-01-12 21:05:08

@T-Man22 

 

When you login the router with a web browser, the tabs in question are here:

 

 

and here:

 

 

If you feel that some tabs in the web management interface are missing, post some screenshots of the issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 509

Replies: 3

Related Articles
MR600 - problem seeing received sms messages
56808 2
MR6400 - problem seeing received sms messages
1436 0
AV600 not seeing default gateway
584 0
wifi losing connection for new samsung tabs/phone
629 0
Requesting Improved UI to see Raw numbers from the antennas in MR600
592 3
I am not seeing my Extender after set-up
408 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.