Bridge between TD-W8961N and TL-MR3420

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bridge between TD-W8961N and TL-MR3420

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bridge between TD-W8961N and TL-MR3420
Bridge between TD-W8961N and TL-MR3420
2022-01-13 21:32:24 - last edited 2022-01-13 21:33:59
Model: TD-W8961N  
Hardware Version:
Firmware Version:

It is possible to bridge from a  TD-W8961N as modem/router  to a TL-MR420 as repeater to extend wi-fi range?. i can access both routers from the main wifi network, but if i connect to the secondary network (the one from the TL-MR420) doesn't connect or doesn't give internet

  0      
  0      
#1
Options
1 Reply
Re:Bridge between TD-W8961N and TL-MR3420
2022-01-14 13:20:40

@kirimaru1982 

 

Both devices support WDS.

Here's a guide for configuring WDS on TD-W8961N - the specific ithing is that WDS is built between two TD-W8961Ns.

Here's a video guide building WDS with TL-MR3420 v3.

TD-W8961N WDS menu is quite different than the TL-MR3420's and that makes me think building WDS between those two won't be successful.

The other way to extend your network is to useTL-MR3420 in AP mode (connected by ethernet cable) using this guide (Case 2).

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 874

Replies: 1

Related Articles