Archer AX10 access point mode not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX10 access point mode not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX10 access point mode not working
Archer AX10 access point mode not working
2022-01-29 21:23:54 - last edited 2022-01-30 01:07:40

Bought this AX10 to use as an access point connected to my ISP router but can't get it to work. Followed various tutorials but nothing works. Don't know what I'm doing wrong.

  0      
  0      
#1
Options
1 Reply
Re:Archer AX10 access point mode not working
2022-01-30 08:02:46

@Thorkell 

 

Follow this guide (Case 1) for AX10 in AP mode.

The essential thing is to configure the AX10 LAN IP address to be in your main router subnet

The AX10 LAN IP address can be set to Smart IP (DHCP) or

if your main router is with 192.168.1.1 LAN IP address, set AX10 LAN IP address to Static IP - 192.168.1.254 for example).

AX10 DHCP server can be set to Auto or OFF.

Ethernet connection between devices should be - main router LAN port => AX10 WAN port.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  3  
  3  
#2
Options

Information

Helpful: 0

Views: 790

Replies: 1

Related Articles