Home Network Community > All Threads > Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch
< All Threads

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch
Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch
2022-03-07 18:42:51

Hi all

 

I have a cisco 250 48 10/100 smart switch. I've had it 3 years and I purely plugged the unit in and have never altered any configuration .

 

would this switch work  ok if it was hardwired direct from a Deco x 20 / x60 etc ? And the switch then fed all other decos around the property ?

 

I've no idea of the firmware as I've never touched the unit or whether this would need to be changed to work with he Decos?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch
2022-03-08 08:01:00

  @Thackers I haven't heard any feedback about this model-Cisco SF250-48 yet and I did see some feedback about Cisco SG220-26 and Cisco 4948-10G that failed to build the Ethernet backhaul. Nomrally IEEE 1905.1 protocol is required for the Ethernet backhaul but not all the users manual of switch have this information included so it is hard to give you an exact answer.

For more details about Ethernet backhaul, please refer to this link:

General questions about Ethernet Backhaul feature on your Deco

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch
2022-03-08 20:41:26

Thanks  @David-TP 

 

am I correct in thinking if I run in AP mode then because all decos are hardwired after the cisco network switch Backhaul should work fine even if the protocol you mentioned isn't available on the cisco switch ?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 749

Replies: 2

Related Articles
Deco router compatibility
481 0
AX73 and RE705X ethernet backhaul / easymesh compatibility
1651 0
Deco P9 Version 1 and Version 2 compatibility?
311 0
Compatibility issues Deco XE5300
392 1
Deco E4 and M4 compatibility
508 0
TP-LINK DECO compatibility
1246 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.