Home Network Community > All Threads > Connecting an MR6400 to provide broadband into an existing LAN network.
< All Threads

Connecting an MR6400 to provide broadband into an existing LAN network.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connecting an MR6400 to provide broadband into an existing LAN network.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connecting an MR6400 to provide broadband into an existing LAN network.
Connecting an MR6400 to provide broadband into an existing LAN network.
2022-05-02 17:10:32 - last edited 2022-05-02 18:04:03
Model: TL-MR6400  
Hardware Version: V5
Firmware Version: 1.1.0.0.9.1

Hi

I have purchased a TP-Link TL-MR6400, to provide a WIFI internet connection into my LAN network, I do need to keep my current router connected, is it possible to use the MR6400 and my current router together on the same LAN.

 

Can anyone explain what settings I would need to change or the best and easiest way to achieve my goal.

 

I have 5 PC’s connected via a LAN network with poor internet. My current router’s IP address is 10.0.0.1 (DHCP enabled) and the MR6400 is 192.168.1.1.

 

Kind Regards

  0      
 
  0      
 
#1
Options
1 Reply
Re:Connecting an MR6400 to provide broadband into an existing LAN network.
2022-05-05 07:15:30

  @Tazam 

 

Hi, it seems that you would like to use the MR6400 as an access point only instead of a router.

The MR6400 doesn't have separate access point mode, but you could try to configure it manually:

1. change the MR6400 LAN IP address to be same subnet as your current router such as 10.0.0.2

2. disable the DHCP server on MR6400

3. connect MR6400 to your current router via Ethernet cable

 

Then connect a laptop to the MR6400 via either Ethernet cable or via WiFi to see if the laptop will be able to obtain IP address from your current router and if internet works.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 469

Replies: 1

Related Articles
MR6400 Router not connecting to internet
1713 0
MR6400 reboot on RDS connection
644 1
model number mr6400(apac) not connecting to ppoe connection
925 0
Connecting swich on a TL-MR6400 router problems
306 0
problem my tplink mr6400
521 0
MR6400 NO-IP not working
5324 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.