Cannot connect wireless (No Wifi signal) but wire is OK

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot connect wireless (No Wifi signal) but wire is OK

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot connect wireless (No Wifi signal) but wire is OK
Cannot connect wireless (No Wifi signal) but wire is OK
2022-05-18 13:02:43 - last edited 2022-05-20 03:39:51
Model: Archer AX1800  
Hardware Version:
Firmware Version:

Suddenly this morning no wifi signal (so no wireless connection possible) but wired devices are working fine (they have internet); what could be wrong...?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Cannot connect wireless (No Wifi signal) but wire is OK-Solution
2022-05-20 03:39:42 - last edited 2022-05-20 03:39:51

Turned out the Wifi was disabled.

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Cannot connect wireless (No Wifi signal) but wire is OK
2022-05-20 02:19:21

Hello @MNS, thank you for reaching out to us, and welcome to the TP-Link community.

 

Please check if you have enabled the Wi-Fi Schedule on the router to turn off the Wi-Fi signal in a period of time. You can login to the router web GUI and go to Advanced > Wireless > Wireless Schedule (The guide is here), and verify the settings and if it is still in the off state.

 

If there is nothing wrong with the Wi-Fi Schedule settings, please go to Wireless Basic settings to check and ensure both the 2.4G and 5G are correctly enabled, then you can try to modify the channels as follows:

Changing Channel and Channel Width on a TP-Link Router

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Cannot connect wireless (No Wifi signal) but wire is OK-Solution
2022-05-20 03:39:42 - last edited 2022-05-20 03:39:51

Turned out the Wifi was disabled.

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 598

Replies: 2

Related Articles