Firmware Update impossible Archer MR600
Hello,
it seems like im facing issues with my TP-Link Archer MR600 and can not solve them by myself.
I would like it to update to Firmware "Archer MR600(EU)_V2_210914", because there ist WPA3 mentioned which I would like to activate. Also the 4G / 3G Bug seems to be resolved.
on the Firmware update Tab it always says my Firmware is up to date and when I try to update it via the downloaded file the upload stops around 33 % with Error code 4503:
Is there anything I'm doing wrong or do I have to change some setting first?
Thanks in advance for your help :-)
Best regards, Tim
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine
Hello,
I am an IT admin for a company in the UK and I have been passed this router to set up for a temporary backup option in a new office, this was purchased from Amazon and came with the below firmware installed out of the box.
Could you please send over the beta firmware to allow me to update the router and stop error code: 1 & allow it to read our sim card.
Here are the router details:
Firmware Version:1.4.0 0.9.1 v0001.0 Build 210727 Rel.33453n Hardware Version:Archer MR600 v2 00000002 IMEI:undefined
Many thanks, Owen
- Copy Link
- Report Inappropriate Content
Hi Owen,
Your current firmware 1.4.0 0.9.1 v0001.0 Build 210727 Rel.33453n is an EU version firmware, please try to download the latest firmware for your MR600(EU) V2 on our official website and update it manually via web interface:
https://www.tp-link.com/en/support/download/archer-mr600/v2/#Firmware
If it cannot update to the latest firmware directly, please try to download and update the firmware Archer MR600(EU)_V2_210914 first to see if it solves the problem.
- Copy Link
- Report Inappropriate Content
@Sunshine Hello, thank you for your prompt reply.
I have tried installing Archer_MR600v2_1.5.0_0.9.1_[210914-rel59719]_up_boot_Release_2021-09-14_16.52.15Archer_MR600v2_1.5.0_0.9.1_[210914-rel59719]_up_boot_Release_2021-09-14_16.52.15 locally on to the router, however as it tried to update it stops at about 60% with the following error: 
I can't run the update on the router itself as it has no connection (does not recognise our working sim), and I can't introduce the router to our current network setup without changing a lot of other network settings.
Many thanks, Owen
- Copy Link
- Report Inappropriate Content
Hi, you mentioned error code 1 before and even the IMEI shows undefined, I am afraid this MR600 is defective, if it is still the same after factory reset, it is recommended to contact the retailer where you bought it to check warranty and get it replaced.
- Copy Link
- Report Inappropriate Content
@Sunshine Hello, thank you for your reply.
I thought it might be, I have let them know and set up a replacement in the meantime.
Cheers
- Copy Link
- Report Inappropriate Content
Re:Firmware Update impossible Archer MR600
Same problem as topic starter has, pls help me to update mr600 v2 EU version
Firmware Version: 1.4.0 0.9.1 v0001.0 Build 210805 Rel.63527n
Hardware Version: Archer MR600 v2 00000002
No one of the listed firmware is working. https://www.tp-link.com/de/support/download/archer-mr600/v2/#Firmware
Archer MR600(EU)_V2_220826 Datum der Veröffentlichung: 2023-03-14
HelP
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, please let us know the hardware and current firmware version of your MR600, is it also the Drei customized firmware 1.4.0 0.9.1 v0001.0 Build 210805 Rel.63527n?
And did you buy it from normal store or from your ISP?
- Copy Link
- Report Inappropriate Content
Hello,
Yes its bought in a store
Firmware Version:1.4.0 0.9.1 v0001.0 Build 210805 Rel.63527n
Hardware Version:Archer MR600 v2 00000002
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 14050
Replies: 124
Voters 0
No one has voted for it yet.