Hi...

I have a friend who has a countryside chalet and wants to access Internet from his cousin who lives about 80

meters away from him. Both properties have an unobstructed view from eachother. My friend has very little

networking knowledge.

He installed an EAP110-outdoor, that i previously  configured, on his cousin's house roof, hardwired the 110's

POE supply to the cousin's router and now he can have Internet from outside of his own chalet. Clear signal,

the 110 does its job.

Until now, everything's okay.

The issue is when he enters his own house, he loses all of the signal. The property's walls block all WiFi

signals.

He bought a second EAP110-Outdoor that he wants to install in his TV tower (as a client for the first EAP110)

and a TL-WA901N inside his chalet to diffuse Wi-Fi inside it. Both are hardwired.

I tried, unsuccesfully to configure the second EAP110-outdoor as a client. It seems that i have to configure

the TL-WA910N to use both it and the EAP together.

Are there any good tutorials to help me configure this setup ? or some explanations ? I have some networking

knowledge but am not a pro.
 

Thank you.

Normand Martel