Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2
Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2
2022-06-02 16:12:23 - last edited 2023-03-08 14:21:15
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.2.4 Build 20210719 rel.12163(5553)

Hello everyone,

 

I have two questions,

  • While trying to update the firmware for AX6000_V1 (Hardware version V1) to the latest available on the Archer AX6000(EU)_V1_211208, the latest firmware filename is "ax6000v1-up-ver1-2-5-P1[20211208-rel49262]_nosign_2021-12-10_17.49.39.bin" . Its odd to see 'nosign' mentioned in the filename, is this firmware update safe to use?
  • In an earlier post its mentioned that AX6000 V1 and V2 are similar. But, I wanted to know if AX6000_V2 firmware is backward compatible with AX6000_V1.

 

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2-Solution
2022-06-02 19:39:22 - last edited 2023-03-08 14:21:15

  @kj8450 

 

You can go ahead and update with the FW for Archer AX6000 HW v1, which you mentioned.

You can't use a FW for a different HW version than yours, the HW versions have to match, otherwise you'll get an error message.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options
1 Reply
Re:Which firmware to use for Archer AX6000_v1: latest nosign or AX6000_v2-Solution
2022-06-02 19:39:22 - last edited 2023-03-08 14:21:15

  @kj8450 

 

You can go ahead and update with the FW for Archer AX6000 HW v1, which you mentioned.

You can't use a FW for a different HW version than yours, the HW versions have to match, otherwise you'll get an error message.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  4  
  4  
#2
Options

Information

Helpful: 0

Views: 801

Replies: 1

Related Articles