Please test gigabit LAN speed on Archer VR2100
Hi, please can someone test what is the maximum LAN speed between two devices connected to the Archer VR2100. I can get maximum 550Mbps.
Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The transfer speed will heavily depend on what fixed drives these devices are using.
They could be HDD, SSD or NVMe, thus the speed will differ according to the hardware installed.
Other factors may involve ethernet cards make/model, their driver version and settings.
- Copy Link
- Report Inappropriate Content
@terziyski can u just test it ?
- Copy Link
- Report Inappropriate Content
I would test it if I had Archer VR2100, sorry.
You can see on the following URL how to use the 'iperf' command to test your network bandwidth:
https://www<dot>dell<dot>com/support/kbdoc/en-bg/000139427/how-to-test-available-network-bandwidth-using-iperf
You can add to the iperf client side '-P 10' parameter so you can saturate the bandwidth of the link, initiating 10 parallel connections.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 593
Replies: 3
Voters 0
No one has voted for it yet.