wn772n not showing on linux

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

wn772n not showing on linux

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
wn772n not showing on linux
wn772n not showing on linux
2022-07-14 18:39:55
Model: TL-WN722N  
Hardware Version: V3
Firmware Version: i dont know

I bought a wn772n today and installed the drivers for linux but unfortunately it doesn't show up in the network section.
It comes out when I do lsusb. Help me! Please.

 

 

┌──(root㉿kali)-[~]
└─# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 174f:116a Syntek EasyCamera
Bus 001 Device 005: ID 0cf3:e500 Qualcomm Atheros Communications
Bus 001 Device 003: ID 2357:010c TP-Link TL-WN722N v2/v3 [Realtek RTL8188EUS]
Bus 001 Device 006: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 001 Device 002: ID 05e3:0605 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                                                                                 
┌──(root㉿kali)-[~]
└─# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:09:30:9b:b6  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether e8:6a:64:bc:0a:29  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 220  bytes 17664 (17.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 220  bytes 17664 (17.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.106  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::cdf8:238e:4af9:a4fb  prefixlen 64  scopeid 0x20<link>
        ether 3c:91:80:3a:ef:51  txqueuelen 1000  (Ethernet)
        RX packets 32731  bytes 33866806 (32.2 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 18824  bytes 3202906 (3.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

 

 

 

(wlan0 is the internal network card in the laptop)

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 540

Replies: 0

Related Articles