Archer AX73 disconnecting all devices from 2.4ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX73 disconnecting all devices from 2.4ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX73 disconnecting all devices from 2.4ghz
Archer AX73 disconnecting all devices from 2.4ghz
2022-08-02 06:54:31
Tags: #Wireless
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.2.2 build 20220317 rel.50456(4555)

Hi everyone. 3 days ago I bought new router to my home network. Router is connected via LAN to internet provider router (provider router has turn off wifi).

 

Both (2.4ghz and 5ghz) wireless turn on Archer AX73.

2.4ghz using about 8 devices (like smart plugs, online cameras, weather stations etc)

5ghz using about 5 devices (some TVs, Iphones, laptops)

and 2 devices connected via LAN.

 

Smart setting for wireless is active.

 

Issue -> Everyday from last 3 days I noticed problems with disconnecting all devices from 2.4ghz.

5ghz working fine, LAN devices OK - but all of 2.4ghz devices lost network and I cannot connect it without turn on/off 2.4 ghz. How to fix it ?

  0      
  0      
#1
Options
9 Reply
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-02 07:32:27

Hello @PrzemekPL 

 

Hello, thank you for asking the community.

 

Regarding the 2.4G disconnection issue, try changing the 2.4G wireless security to WPA2-PSK, AES, and choosing the wireless mode to 802.11a/n/ac mixed instead of 802.11 a/n/ac/ax mixed, then monitor again.

 

You may also check this article to review and modify the other wireless settings or interference.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-02 07:57:47

  @Kevin_Z Thank you for your support.

 

Kevin_Z wrote

try changing the 2.4G wireless security to WPA2-PSK, AES

 

Ok done, changed from WPA2-PSK[AES]+WPA-PSK[TKIP] to WPA2-PSK[AES]

 

Kevin_Z wrote

choosing the wireless mode to 802.11a/n/ac mixed instead of 802.11 a/n/ac/ax mixed, then monitor again.

 

 

To change this setting I need turn off Smart Connect (should I?).

After turn off Smart:

802.11 ax only

802.11 b/g/n mixed

802.11 b/g/n/ax mixed (set as default)

 

So which one ? 

 

Kevin_Z wrote

You may also check this article to review and modify the other wireless settings or interference.

 

Channels set to differ from other nearby networks (I have access to them).

  1  
  1  
#3
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-02 08:07:15

@PrzemekPL 

 

You may monitor the connectivity first with the wireless security WPA2-PSK, AES.

 

If the issue persists, please try to change the mode to 802.11 b/g/n mixed, then monitor again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-02 15:28:58 - last edited 2022-08-02 21:30:44

  @Kevin_Z 

 

Eh there is some problem... My Cameras working only with WPA Security. When I changed it to WPA2 only then cameras stopped working. 
 

Why, if the device (Archer AX73) has a WPA security option, it is better not to use it because it may disrupt the devices?

  0  
  0  
#5
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-03 02:54:31

@PrzemekPL 

 

I understand that some old devices may only support WPA security, but that is less secure and it's not suggested.

 

Can I know what is the brand and model of the camera?

 

BTW, what are the security options on the AX73? Can I have a screenshot? If there is still an option for WPA without TKIP, you can give it a try.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-03 06:42:23

Kevin_Z wrote

@PrzemekPL 

 

I understand that some old devices may only support WPA security, but that is less secure and it's not suggested.  

  @Kevin_Z 

I understand too but not suggested and not working at all it's different.

 

Kevin_Z wrote

@PrzemekPL 

Can I know what is the brand and model of the camera?

 

It's some polish products, Orllo Goodcams Z6. It's worked 2 years with Huawei router without any problem.

 

Kevin_Z wrote

@PrzemekPL 

BTW, what are the security options on the AX73? Can I have a screenshot? If there is still an option for WPA without TKIP, you can give it a try.

 

I had to change to WPA + WPA2 because of the cameras and at 7am again I noticed no devices on the 2.4ghz network.

Screen added
File:
Zrzut ekranu 2022-08-3 o 08.38.54.pngDownload
  0  
  0  
#7
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2022-08-03 11:16:52

@PrzemekPL 

 

Thank you for getting back. If the issue persists when the security is WPA2-PSK[AES]+WPA-PSK[TKIP], I would like to escalate the case to our support engineers, who would contact you via your registered email to follow it up and provide a solution.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2023-01-23 12:53:02

  @Kevin_Z 

 

I have since a few weeks the same problem as the topicstarter.

Once every (other) day, or one day it was even twice, all the devices (around 11) on 2.4GHz lose the connection.

Reconnecting is not possible, so I have to restart the router (or change a wifi setting, so it restarts only the wifi).

 

I tried all your suggestions, but everything gave the same result and didn't work.

 

Any other suggestions?
 

  0  
  0  
#9
Options
Re:Archer AX73 disconnecting all devices from 2.4ghz
2023-01-28 07:57:39

 

mortael wrote

  @Kevin_Z 

 

I have since a few weeks the same problem as the topicstarter.

Once every (other) day, or one day it was even twice, all the devices (around 11) on 2.4GHz lose the connection.

Reconnecting is not possible, so I have to restart the router (or change a wifi setting, so it restarts only the wifi).

 

I tried all your suggestions, but everything gave the same result and didn't work.

 

Any other suggestions?
 

 

@mortael Is your AX73 also working as AP mode?

 

What are the wireless security settings on the AX73 for the 2.4G network? Please post a screenshot after masking the SSID and password. Try changing the mode for the 2.4G network from "802.11b/g/n/ax mixed" to "802.11b/g/n". Thanks.

 

What are the devices that connect to the 2.4G network also? Are they connecting to other 2.4G networks without an issue?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2307

Replies: 9

Tags

Wireless
Related Articles