Xbox Double Nat

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Xbox Double Nat

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Xbox Double Nat
Xbox Double Nat
2022-09-24 07:59:11 - last edited 2022-09-26 03:34:43
Model: Archer MR600  
Hardware Version:
Firmware Version:

Hello I am struggling to get rid of my double nat issue on my xbox one, I have the Archer MR600 with Smarty as the Sim.

 

No other routers and the connection is weird. 

 

Fairly new to this so please excuse any facepalm moments, thank you :) 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Xbox Double Nat-Solution
2022-09-24 11:07:33 - last edited 2022-09-26 03:34:43

  @SGeko 

 

If you receive a private IP address on your WAN port that's the reason for the double NAT:

 

 

Private (internal) addresses are not routed on the Internet, and no traffic can be sent to them from the Internet; they are only supposed to work within the local network.
Private addresses include IP addresses from the following subnets:

  • Range from 10.0.0.0 to 10.255.255.255 — a 10.0.0.0 network with a 255.0.0.0 or /8 (an 8-bit) mask
  • Range from 172.16.0.0 to 172.31.255.255 — a 172.16.0.0 network with a 255.240.0.0 or /12
  • A 192.168.0.0 to 192.168.255.255 range, which is a 192.168.0.0 network masked by 255.255.0.0 or /16
  • A special range 100.64.0.0 to 100.127.255.255 with a 255.192.0.0 or /10 network mask; this subnet is recommended according to rfc6598 for use as an address pool for CGN (Carrier-Grade NAT)

 

If that's the case you may contact your ISP and ask for any resoltion on this.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Xbox Double Nat-Solution
2022-09-24 11:07:33 - last edited 2022-09-26 03:34:43

  @SGeko 

 

If you receive a private IP address on your WAN port that's the reason for the double NAT:

 

 

Private (internal) addresses are not routed on the Internet, and no traffic can be sent to them from the Internet; they are only supposed to work within the local network.
Private addresses include IP addresses from the following subnets:

  • Range from 10.0.0.0 to 10.255.255.255 — a 10.0.0.0 network with a 255.0.0.0 or /8 (an 8-bit) mask
  • Range from 172.16.0.0 to 172.31.255.255 — a 172.16.0.0 network with a 255.240.0.0 or /12
  • A 192.168.0.0 to 192.168.255.255 range, which is a 192.168.0.0 network masked by 255.255.0.0 or /16
  • A special range 100.64.0.0 to 100.127.255.255 with a 255.192.0.0 or /10 network mask; this subnet is recommended according to rfc6598 for use as an address pool for CGN (Carrier-Grade NAT)

 

If that's the case you may contact your ISP and ask for any resoltion on this.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1029

Replies: 1

Related Articles