Archer A64 Primary DNS keeps reverting after reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer A64 Primary DNS keeps reverting after reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer A64 Primary DNS keeps reverting after reboot
Archer A64 Primary DNS keeps reverting after reboot
2022-12-03 01:47:22 - last edited 2022-12-06 00:56:13
Model: Archer A64  
Hardware Version: V1
Firmware Version: Archer A64(EU)_V1_1.12.0 Build 221010

I use PiHole as my local DNS server at the IP of 192.168.0.103. some time ago i upgraded the firmware to the latest on my router and now i had to reconnect with every one of my devices after the router reboots because it keeps reverting the Primary DNS to 192.168.0.1. and when i correct it and click on save, nothing hapens. Very frustrating..

 

And the logs are there:

 

30 INFO 0days, 00:00:31, [wan]advanced ddns -wanChanged

31 INFO 0days, 00:00:31, [wan]systool sntpc -sntpRequest

32 INFO 0days, 00:00:32, [dnsproxy]Register Dns Detect

33 INFO 0days, 00:00:32, [dnsproxy]Register primary = 0x12e0254, secondary = 0x12c0254

34 ERROR 0days, 00:00:32, [inetd]INETD: select error, abort.

35 WARNING 0days, 00:00:32, [cwmp]cwmp is not start

36 WARNING 0days, 00:00:34, [dhcps]Lease host name not found.

37 INFO 0days, 00:00:42, [dhcps]Send OFFER with ip 192.168.0.110.

38 INFO 0days, 00:00:43, [dhcps]Send ACK to 192.168.0.110.

39 INFO 0days, 00:00:47, [dhcps]Send OFFER with ip 192.168.0.120.

40 INFO 0days, 00:00:47, [dhcps]Send ACK to 192.168.0.120.

 

I had to block every device one by one after reboot and then unblock every one to automatically assign the correct DNS address.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer A64 Primary DNS keeps reverting after reboot-Solution
2022-12-05 03:17:52 - last edited 2022-12-06 00:56:13

@bcseh 

 

A similar issue has been reported here in the following community thread, this would be addressed and fixed in the next official firmware:

https://community.tp-link.com/en/home/forum/topic/590212

 

If you require this to be corrected now, we will confirm with the developers to see if they can help with a beta firmware as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Archer A64 Primary DNS keeps reverting after reboot-Solution
2022-12-05 03:17:52 - last edited 2022-12-06 00:56:13

@bcseh 

 

A similar issue has been reported here in the following community thread, this would be addressed and fixed in the next official firmware:

https://community.tp-link.com/en/home/forum/topic/590212

 

If you require this to be corrected now, we will confirm with the developers to see if they can help with a beta firmware as well.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Archer A64 Primary DNS keeps reverting after reboot
2022-12-06 00:55:40

  @Kevin_Z 

 

thanks a lot, it will be patched for the Archer A64 too if i understand correctly? Just because the link you sent is for the C80. I will try to be patient enough, bit scared of beta firmware. Thanks again!

  0  
  0  
#4
Options
Re:Archer A64 Primary DNS keeps reverting after reboot
2022-12-07 03:32:48

@bcseh 

 

Yes, you are right. This could be fixed in the future official release soon. We will also confirm with the developers to see if they can provide a beta version for A64 as well if you require.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Archer A64 Primary DNS keeps reverting after reboot
2022-12-07 16:51:54

  @Kevin_Z 

 

Thanks a lot for your help! And why not give it a try. Where will be the beta software available?

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1041

Replies: 4

Related Articles