Acrher C60 doesn't give IP in WDS mode
I have an Archer C60 v3.0 that I'm trying to use as a range extender ( WDS mode )
The main VDSL modem I'm using to connect to the internet is Archer VR600 , it connects to the internet and can be access wirelessly from clients.
The VR600 IP is : 192.168.1.1
On the C60 , my settings are as follows :
IP is : 192.168.1.201
DHCP is disabled
Operation mode : Router ( if I change it to access point I don't get the WDS settings under system tools > system parameters )
System tools > System parameters
WDS bridging is enabled, and can select the wireless network on the VR600
Wireless status shows WDS is running ( screen shot attached )
The clients can connect to the C60 , but don't get an IP address and can't access the internet.
What am I missing ?
I'm assuming the C60 should relay the DHCP requests to the VR600 and assign it to the clients
Any help is appreciated