Archer C60 WDS not working .
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a setup of 2 TP link routers for my home office. I use the Archer C60 router to my office pc, so I enable WDS and it worked fine for a long time. Suddenly, since morning its not able to give me the connection. The default IP gateway is not changing and in Status page, WDS option shows "Assoc". Is there anything I need to know or doing wrong?
Its emergency.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
Do you mean you have two C60 routers, one is working as the main router and the other connects to the main via WDS? Is there any change before it stops working?
You may try to restart both routers and see if they can build up the connection again. If not, please ensure the main router is still working properly, then reconfigure the 2nd router as below:
https://www.tp-link.com/support/faq/1555/
Hope this helps, good days.
- Copy Link
- Report Inappropriate Content
Hello,
Do you mean you have two C60 routers, one is working as the main router and the other connects to the main via WDS? Is there any change before it stops working?
You may try to restart both routers and see if they can build up the connection again. If not, please ensure the main router is still working properly, then reconfigure the 2nd router as below:
https://www.tp-link.com/support/faq/1555/
Hope this helps, good days.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1683
Replies: 1
Voters 0
No one has voted for it yet.