wpa8631p-kit v3 OneMesh problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

wpa8631p-kit v3 OneMesh problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
wpa8631p-kit v3 OneMesh problem
wpa8631p-kit v3 OneMesh problem
2023-04-21 16:55:09
Model: TL-WPA8631P KIT  
Hardware Version: V3
Firmware Version: 3.0.1

Hi, it's been a year. I use tp-link VR600-v3 and wpa8631p-kit v3. However, since I updated to wpa8631p-kit v3, my onemesh network has been disrupted and my internet has been depraved. Now it's starting to get really annoying. I live in Turkey, I am waiting for your solution as soon as possible. have a nice day.

 

wpa8631p-kit firmware version: 3.0.1 build 20220330 Rel. 52768

 

Archer vr600 v3 firmaware version: 1.5.0.0.9.1 v009e.0 Build 220518 Rel.43816n

  0      
  0      
#1
Options
6 Reply
Re:wpa8631p-kit v3 OneMesh problem
2023-04-21 17:02:21
If I use it with this firmware, there is no problem for 4-5 days, but on the 6th day OneMesh does not work, there are drops and disconnects in internet speed. To resolve this situation, I reset to WPA8631P. I have to do this every week. But, I'm tired now, :) I look forward to your offering a permanent solution.
  0  
  0  
#2
Options
Re:wpa8631p-kit v3 OneMesh problem
2023-04-23 08:50:16

  @Sp1tze 

 

Hi, could you please check if power saving mode is enabled on the powerline extender? If so, please try to disable it to see if it solves the problem.

 

By the way, when the problem happens, is the powerline light on the powerline units still on? internet still works fine, only the OneMesh network stops, right?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:wpa8631p-kit v3 OneMesh problem
2023-04-23 09:16:24

  @Sunshine Hello, first of all, I have never turned on the power saving mode, as you can see now, as you mentioned above, the onemesh problem has happened all the connection lights of the device continue to be on. I see it as probably a software problem. I wonder if I have beta software for my powerline adapter? I look forward to your solution, I wish you a good day.

  0  
  0  
#4
Options
Re:wpa8631p-kit v3 OneMesh problem
2023-04-23 09:18:35

  @Sp1tze 

  0  
  0  
#5
Options
Re:wpa8631p-kit v3 OneMesh problem
2023-04-23 09:36:23

  @Sp1tze 

 

Hi, may I know if the issue started happening after you updating the TL-WPA8631P firmware from TL-WPA8631P_V3_210514 to TL-WPA8631P_V3_220330? Is there any similar issue when using the previous firmware 210514?

 

Besides, is there any error message when OneMesh stops working? and internet still works at that moment if you connect the powerline extender, right?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#6
Options
Re:wpa8631p-kit v3 OneMesh problem
2023-04-23 09:54:40 - last edited 2023-04-23 10:12:51

Yes, there are problems you mentioned.

In the last version I installed, I started to have this problem more. (3.0.1 Build 20220330 Rel.52768 - TL-WPA8631P v3.0)
 
 
 
"Besides, is there any error message when OneMesh stops working? and internet still works at that moment if you connect the powerline extender, right?"
 
There are no problems or log records related to Onemesh. In fact, when I enter the menu (WPA8631p), onemesh is open, but the connection with the modem (Archer VR600v3) is already lost. I understand this from the speed on my internet and the inability of the mobile connection to connect.
  0  
  0  
#7
Options