Home Network Community > All Threads > Parental control block command works only
< All Threads

Parental control block command works only

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Parental control block command works only

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Parental control block command works only
Parental control block command works only
2023-04-30 19:27:08
Model: RE505X  
Hardware Version: V2
Firmware Version:

Hello, how does it possible that the "block" command and the "time limits" work via the range extender on the parental control tab, but the "bedtime" & "off time" settings do not? Is it a simple program-code error?? 

 

  0      
 
  0      
 
#1
Options
13 Reply
Re:Parental control block command works only
2023-05-04 09:32:53

  @VIK78 

 

Hi, Is the parental control settings configured on your main router? please connect the same client device to your router Wi-Fi directly to see if bedtime and off time works fine.

 

Besides, when the client device is connected to range extender, please check if the client device mac address displayed on the router client list is the same as that used to configure parental control or not.  

 

By the way, what is the model number of your main router? Please make sure the router and extender system time are both correct.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Parental control block command works only
2023-05-04 19:57:25 - last edited 2023-05-04 20:01:12

  @Sunshine 

 

Hello, 1st thanks for your reply.

 

Yes, the parental settings configured on the router. (Archer AX73 V1 latest fw with Re505x v2 latest fw).

 

I have checked many times the client list on th RE and on the router aswell. If the devices connected directly to the router every parental settings work, if the devices connected to the RE only the block/reward and the time limit work, Bed time and Off time do not.

 

The system times for both devices syncronized and match with all of devices local time as well from the beginning. Btw, I cancelled my subscription for HomeshieldPro today. It is too expensive for a non-usable parental control feature. (It was the original aim when I bought this system). Now I use only the block/reward commands to control my kids devices, at least it works with the RE.

  0  
  0  
#3
Options
Re:Parental control block command works only
2023-05-05 09:12:45

  @VIK78 

 

Hi, would you please continue to troubleshoot with us to locate the issue? If so, please provide the following details:

1. Is the OneMesh enabled for the router and extender? if not, is the extended network name the same as the router or not?

2. Even though you have canceled the Homeshield pro, bedtime should still be available, please configure bedtime and check if it works via extended network.

3. If bedtime still doesn't work via extended network but works fine via router network, please provide firmware version of the router and extender, we will escalate your case to senior engineer.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Parental control block command works only
2023-05-07 14:07:34

  @Sunshine 

 

Hello, I appreciate you to work on the issue.

 

1.,yes I use Onemesh, the SSID are the same on both devices 

2. I suprised, because when I unsubscribed the parental control features disappeared from the app. But just for the kids. For me and for my wife it is still working. For the kids, the app requires subscribe to HomeshieldPro again. I did not till now.

3. AX73: 1.2.4 build 20230317 rel. 61293

     RE505X: 1.0.12 Build 20211107 rel. 182157

 

  0  
  0  
#5
Options
Re:Parental control block command works only
2023-05-08 02:44:45

  @VIK78 

 

Hi, the kids device doesn't have any parental control options or just no bedtime option? 

And if kids device is already in an parental control profile, please edit the existing profile to see if you could see bedtime. If there is still any problem, please share with us some screenshots.

 

By the way, for your and your wife device, if you configure bedtime for them for testing purpose, is the bedtime working fine via extended network?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:Parental control block command works only
2023-05-09 18:03:03

  @Sunshine 

 

Hello, the two kids: on the 1st picture, the 2nd picture shows when I tap the Family icon in the app.

 

File:
Screenshot_2023-05-09-20-00-31-289_com.tplink.tether.jpgDownload
  0  
  0  
#7
Options
Re:Parental control block command works only
2023-05-09 18:03:30

  @VIK78 

 

2nd pic 

File:
Screenshot_2023-05-09-20-02-40-205_com.tplink.tether.jpgDownload
  0  
  0  
#8
Options
Re:Parental control block command works only
2023-05-09 18:04:57

  @VIK78 

 

3rd pic shows the parents. Apa means Dad, Anya means Mom.

File:
Screenshot_2023-05-09-20-04-21-058_com.tplink.tether.jpgDownload
  0  
  0  
#9
Options
Re:Parental control block command works only
2023-05-09 18:06:13

  @VIK78 

4th picture shows that everything is settable for the parents.

File:
Screenshot_2023-05-09-20-05-58-739_com.tplink.tether.jpgDownload
  0  
  0  
#10
Options
Re:Parental control block command works only
2023-05-09 18:33:34 - last edited 2023-05-09 19:17:47

  @VIK78 

 

Test1 with Mom's device (connected to the RE):

- BLOCK command works perfectly.

 - UNBLOCK command works perfectly.

 

Test2 with Mom's device (connected to the RE)

- Bed time configured (pic attached), result is that the bed time settings doesn't work. The device is still online with live internet connection.

 

Test3 same like test1, results are the same.

 

(One comment, the weekdays and weekends configurations are still alive after I have already unsubscribed HomeshieldPro. Is it okay? If I remember well, when I first time installed the app there was no separated days for the configuration,but maybe I'm wrong.)

File:
Screenshot_2023-05-09-20-25-03-093_com.tplink.tether.jpgDownload
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 1291

Replies: 13

Related Articles
Can not block websites using parental control
3632 1
WhatsApp works through Parental Control
1888 0
Parental Control cannot block Apps
645 0
Parental control works with macadress and not username
259 1
Parental control
199 0
Archer C50, Parental Control, how to block all websites?
647 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.