Home Network Community > All Threads > Switch TL-SG105S V3 port speed
< All Threads

Switch TL-SG105S V3 port speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Switch TL-SG105S V3 port speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Switch TL-SG105S V3 port speed
Switch TL-SG105S V3 port speed
2023-06-07 15:40:40 - last edited 2023-06-21 02:55:39
Model: TL-SG105  
Hardware Version: V3
Firmware Version:

Good afternoon,
I'm having internet speed problems on my television, I did a speedtest and I noticed that on the television I only have 40mbps, while on the computer I have 500mbps.
I have a TL-SG105S V3 switch, with only the computer and television on.
I think that at the time my internet operator configured the switch in relation to the speed of the switch ports.
I tried to access the router's web interface via ip 192.168.0.1 but I can't even access the page.
What can I do to acess the page?
And how do I increase the speed of switch port 3?

 

Thanks.

Greetings,

Bruno

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Switch TL-SG105S V3 port speed-Solution
2023-06-08 14:28:29 - last edited 2023-06-21 02:55:39

  @BrunoF95 

 

TL-SG105S V3 is an unmanaged gigabit switch, i.e. its ports speed is auto negotiated.

There's two possibilities in your case:

1. Your TV LAN port is 100 mb capable only - hence the speed of 40 mbps.

2. Your TV LAN port is 1000 mbps capable, but the switch port negotiated 100 mbps - you should change the ethernet cable (between TV and switch) with another one with good quality, which is CAT 5E/6 branded and test again.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:Switch TL-SG105S V3 port speed-Solution
2023-06-08 14:28:29 - last edited 2023-06-21 02:55:39

  @BrunoF95 

 

TL-SG105S V3 is an unmanaged gigabit switch, i.e. its ports speed is auto negotiated.

There's two possibilities in your case:

1. Your TV LAN port is 100 mb capable only - hence the speed of 40 mbps.

2. Your TV LAN port is 1000 mbps capable, but the switch port negotiated 100 mbps - you should change the ethernet cable (between TV and switch) with another one with good quality, which is CAT 5E/6 branded and test again.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:Switch TL-SG105S V3 port speed
2023-06-08 14:41:14

  @terziyski Thanks for helping.

I tried a different cable, its the same. I think my TV LAN port is only 100mb capable like you said, i will buy a gigabit ethernet to usb 2.0 and try it.

I will let you guys know if it worked.

 

Greetings

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 923

Replies: 2

Related Articles
TL-SG105s reduces my speeds
693 0
TL-SG105S(UN) Ver.4.0 TL-SG105(TDP) differences Ver6.0
805 0
Is the TL-SG105 switch a good choice for IPTV?
8809 0
5 port switch drops internet when plugged in
1500 0
tl-sg105 port speed question
1088 0
TL-SG105 Switch keeps disconnecting
1456 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.