Set up Archer C50 to work with captive portal
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Set up Archer C50 to work with captive portal
Model:
Archer C50
Hardware Version: V1
Firmware Version: 0.9.1 0.4 v.0001.0 Build 211108 Rel.33223n(4555)
Good evening,
I have an issue setting a small network on a ship.
I have a captive portal Waver G, that is working without any problems. As soon as you connect, a pop out window for sigh-in appears. The accounts are
working as should.
A Lan cable to the next router Archer C50 is connected (guest to Internet), then another cable from LAN to Internet port to the next router.
In the first 20min both routers require sign-in once you connect to them. After some time sign-in window do not appear and you can connect
and have internet without any sign-in, that is a problem in our case.
As I understand (maybe wrong) I should set up the modem in bridge mode, but can't find the way.
Thanks in advance for assisting !
