WR841N wired link speed only 10Mbps
Hello,
The cable transfer speed is limited to 10mbs, it's not a wiring problem because with another modem I don't have this problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I confused megabytes with megabits.,
The modem support 100Mbps -> 100/8 = 12.5MBps.
Sorry....
- Copy Link
- Report Inappropriate Content
Try with another cat 5 or cat 5e cable. Ensure the cable is connected securely.
Reset the router to factory defaults to exclude all possible advanced settings that may limit the speed.
- Copy Link
- Report Inappropriate Content
HI,
I'm sure the problem is not the cabling, because I use CAT6 cables and they work with the other modem.
I tried resetting the modem settings but same problem.
- Copy Link
- Report Inappropriate Content
There's a newer FW release for your WR841N - TL-WR841N(EU)_V11_211209 here.
Update the FW and test again. If the issue persists follow @Liverpool20 advice and use another ethernet cable to test - sometimes these devices are picky on cabling.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Try this link - global english support website - your local support website has not been updated.
- Copy Link
- Report Inappropriate Content
I confused megabytes with megabits.,
The modem support 100Mbps -> 100/8 = 12.5MBps.
Sorry....
- Copy Link
- Report Inappropriate Content
my fault also. I didn't notice that also.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 980
Replies: 7
Voters 0
No one has voted for it yet.