RE505X disconnecting from Onemesh Wi-Fi network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE505X disconnecting from Onemesh Wi-Fi network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE505X disconnecting from Onemesh Wi-Fi network
RE505X disconnecting from Onemesh Wi-Fi network
2023-07-27 02:25:09
Model: RE505X  
Hardware Version: V1
Firmware Version: 1.0.12 Build 20211107 Rel. 182157

Hi Guys,

 

I'm using a Archer AX73 (HW v2.0 - FW 1.0.8 Build 20230616 Rel. 65817(5553)) as main router and a RE505X (HW v1.0 - FW 1.0.12 Build 20211107 Rel. 182157) to create a mesh network.

 

Some time ago the extender was unable to connect using 5G and you recommended to fix the Wi-Fi channel in the router side, like 2.4G fix to Channel 1/6/11(just choose one of them, then 5G fix to Channel 36. This was done and it starts to connect with no problem. What I didn't paid attention is that it was disconnecting from the network, keeping 2.4G and 5G LEDs on, after few hours. I just discovered this because I connected a printer to RE505X Ethernet port.

 

After a FW reinstallation it stayed connect for almost 48hrs, and I believed problem was solved, but today it was needed so restart it tree times to be able to use the printer.

 

Please,can you help me with this issue?

 

Kind regards!!

 

Bertrand da Silva

  0      
  0      
#1
Options
4 Reply
Re:RE505X disconnecting from Onemesh Wi-Fi network
2023-07-28 08:55:37

  @BertranddaSilva 

 

Hi, thank you very much for posting on TP-Link Community.

You mean the 2.4G and 5G LEDs are still on but the range extender has no internet access, right?

1. When the issue happens next time, please connect a computer to the extender LAN port and check IP address&default gateway of the computer to see if it is assigned by the main router or the extender:

How to find IP address on your devices

 

2. If the IP address of the computer is assigned by the range extender, please login the extender page and turn off DHCP Server on the extender to see if it helps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:RE505X disconnecting from Onemesh Wi-Fi network
2023-07-31 23:47:50

  @Sunshine 

 

Hi Sunshine, thanx for your answer!

 

I had already turned off DHCP server since device installation. What I did now is start to use a fixed IP address instead let it get one from router. Together with this, to avoid any problem, I reserved RE505X IP address on the router DHCP server. It's working for three/four days, since it's IP address was fixed.

 

Kind regards!!

 

Bertrand da Silva

  0  
  0  
#4
Options
Re:RE505X disconnecting from Onemesh Wi-Fi network
2023-08-01 20:35:55

  @BertranddaSilva Eu tive problemas parecidos ao seu ao instalar AX73 (router) RE505(repetidor). Um detalhe que estava passando despercebido era o a largura da banda 5g que vinha do router.

AX73 em Wireless - 5GHz Channel Width - 20/40/80/160 MHz

A partir dai o repetidor e o roteador pararam com conflitos

Espero ter ajudado!

 

I had problems similar to yours when installing AX73 (router) RE505(repeater). One detail that was going unnoticed was the 5g bandwidth coming from the router.

AX73 go to Wireless - 5GHz Channel Width - 20/40/80/160 MHz

From then on, the repeater and the router stopped having conflicts.

I hope i could help!

  0  
  0  
#5
Options
Re:RE505X disconnecting from Onemesh Wi-Fi network
2023-08-14 21:09:18

Hello  @RodrigoJM I'm using this same setup since devide installation. After last change, when I fixed RE505X IP address, it is disconnecting only once or twice a week. That is a little better, but isn't a solution.

 

Thank you for your help!!

 

Nice regards,

 

Bertrand da Silva

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1066

Replies: 4

Related Articles