Vr300 Wifi client block

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Vr300 Wifi client block

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Vr300 Wifi client block
Vr300 Wifi client block
2023-09-02 04:40:43 - last edited 2023-09-05 09:44:43
Model: Archer VR300  
Hardware Version: V2
Firmware Version: 1.5.0 3438n

Can i block a client example camera only on wifi. Modem blocks all communication if i block the client. Client must connect to a acces point which is near to it. But vr300 doesnt have a wifi only block system. It blocks all the cominication. I only want it to block acces to it 2.4 wifi 

thank you

  0      
  0      
#1
Options
1 Accepted Solution
Re:Vr300 Wifi client block-Solution
2023-09-04 14:01:46 - last edited 2023-09-05 09:44:43

  @Xotr 

 

No, you can't block only the access to the 2.4 GHz radio. When using blacklist the device would be blocked from accessing your LAN:

"Access Control is used to allow or block specific client devices from accessing the network. When a device is blocked, it is unable to communicate with other devices or connect to the Internet. "

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
4 Reply
Re:Vr300 Wifi client block
2023-09-04 05:34:17

Xotr wrote

Can i block a client example camera only on wifi. Modem blocks all communication if i block the client. Client must connect to a acces point which is near to it. But vr300 doesnt have a wifi only block system. It blocks all the cominication. I only want it to block acces to it 2.4 wifi 

thank you

  @Xotr 

  0  
  0  
#2
Options
Re:Vr300 Wifi client block-Solution
2023-09-04 14:01:46 - last edited 2023-09-05 09:44:43

  @Xotr 

 

No, you can't block only the access to the 2.4 GHz radio. When using blacklist the device would be blocked from accessing your LAN:

"Access Control is used to allow or block specific client devices from accessing the network. When a device is blocked, it is unable to communicate with other devices or connect to the Internet. "

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
Re:Vr300 Wifi client block
2023-09-16 22:02:44

  @Xotr 

if only we had wireless MAC filtering like archer c2

  0  
  0  
#4
Options
Re:Vr300 Wifi client block
2023-09-20 12:46:35

  @Xotr 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 638

Replies: 4

Related Articles