Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20
Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20
2023-09-26 04:27:52 - last edited 2023-09-28 08:47:23
Model: Archer AX55   Archer AX10  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20230603 rel.46473(5553)

Hola. Tengo 2 routers: un Archer AX55 3000 v1 1.2.3 Build 20230603 rel.46473(5553), y un Archer AX10 1500 v1,20 1.3.9 Build 20230728 Rel. 45716(5553).
Configuro el AX10 como satélite mesh del AX55 conectados vía cable UTP de puerto Lan a puerto Lan. 
La configuración ejecuta correctamente y empieza a funcionar todo normalmente.
Sin embargo a los pocos minutos se empiezan a ralentizar los equipos, principalmente el AX55, y llega a un punto en que se el AX55 se reinicia, y repite constantemente todo el proceso.
Desconecto el AX10 y el AX55 vuelve a trabajar solo correctamente.
Hay alguna configuración en particular para realizar para que no tenga este problema?
No se genera el problema si el AX10 es un repetidor del AX50. Funciona, pero no es mesh...
Agradeceré cualquier información que ayude a solucionar el problema.
 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20 -Solution
2023-09-27 07:23:39 - last edited 2023-09-28 08:47:23

  @NorbertoQ Neither the AX55 nor the AX10 support Ethernet backhaul. You're gonna cause a network loop with this connection:LAN to LAN.

However,these two device support EasyMesh,so you can use EasyMesh to mesh. 

You have two methods :

1.Visit http://tplinkwifi.net,Go to Advanced > EasyMesh, and enable EasyMesh.Click ADD SATELLITE DEVICES, select TP-Link Router, then click NEXT.Click ADD. When prompted “This device has been added successfully “, click OK, then click FINISH.

refer to:How to add a router to an EasyMesh network as a satellite device | TP-Link

2.Connect the LAN of AX55 with the WAN of AX10 via the Ethernet cable,and change the operation mode of AX10 to AP mode.

refer to:How to configure Wireless Router as Main AP Mode? | TP-Link

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Problemas vinculacion Mesh entre Archer AX55 3000 V1 y Archer AX10 1500 V1.20 -Solution
2023-09-27 07:23:39 - last edited 2023-09-28 08:47:23

  @NorbertoQ Neither the AX55 nor the AX10 support Ethernet backhaul. You're gonna cause a network loop with this connection:LAN to LAN.

However,these two device support EasyMesh,so you can use EasyMesh to mesh. 

You have two methods :

1.Visit http://tplinkwifi.net,Go to Advanced > EasyMesh, and enable EasyMesh.Click ADD SATELLITE DEVICES, select TP-Link Router, then click NEXT.Click ADD. When prompted “This device has been added successfully “, click OK, then click FINISH.

refer to:How to add a router to an EasyMesh network as a satellite device | TP-Link

2.Connect the LAN of AX55 with the WAN of AX10 via the Ethernet cable,and change the operation mode of AX10 to AP mode.

refer to:How to configure Wireless Router as Main AP Mode? | TP-Link

Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 499

Replies: 1

Related Articles