OneMesh not working on AX20 and WPA8631

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OneMesh not working on AX20 and WPA8631

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OneMesh not working on AX20 and WPA8631
OneMesh not working on AX20 and WPA8631
2023-10-27 22:59:29 - last edited 2023-10-28 14:14:57
Model: Archer AX20  
Hardware Version: V1
Firmware Version: 1.3.6 Build 20230830 rel.15380(5553)

Hello to the forum. I have an Archer AX20 (AX1800 Wi-Fi 6 Router). Hardware version Archer AX20 v1.20 and a TL-WPA8631P v4.6 with also the lastest firmware available. Both devices are OneMesh compatible (at least is available on the configuration), but can't join each other. Why??

 

Also the TL-WPA8631P has some issues (the SSID configuration is not saved when the device is rebooted and the time zone configuration can't be updated).

  0      
  0      
#1
Options
1 Accepted Solution
Re:OneMesh not working on AX20 and WPA8631-Solution
2023-10-28 00:28:15 - last edited 2023-10-28 14:14:57

  @Federosario 

 

Hi,

 

Regarding the OneMesh, have you tried all the available methods? https://www.youtube.com/watch?v=FeaIp47_8zE

 

If none of them works, reset the TL-WPA8631P to factory defaults and then try again.

 

And also make sure there is a reasonably good Powerline connection between the TL-WPA8631P and the other Powerline adapter that is connected to the AX20. 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:OneMesh not working on AX20 and WPA8631-Solution
2023-10-28 00:28:15 - last edited 2023-10-28 14:14:57

  @Federosario 

 

Hi,

 

Regarding the OneMesh, have you tried all the available methods? https://www.youtube.com/watch?v=FeaIp47_8zE

 

If none of them works, reset the TL-WPA8631P to factory defaults and then try again.

 

And also make sure there is a reasonably good Powerline connection between the TL-WPA8631P and the other Powerline adapter that is connected to the AX20. 

Recommended Solution
  0  
  0  
#2
Options
Re:OneMesh not working on AX20 and WPA8631
2023-10-28 14:15:25
Everything was solved after reset to defaults the Powerline. GREAT!!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 528

Replies: 2

Related Articles