How to enable VPN Client?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to enable VPN Client?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to enable VPN Client?
How to enable VPN Client?
2023-11-18 02:18:02 - last edited 2023-12-05 12:46:37
Tags: #VPN
Model: Archer AX20  
Hardware Version: V4
Firmware Version: 1.1.0 Build 20230725

According to several tutorials and articles, the AX20 router supports VPN Client, but when entering advanced settings there is no such functionality in the menu.

Is there any newer firmware or something?

 

Hardware: V4.6

Firmware: 1.1.0 Build 20230725 Rel. 55602(5553)

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to enable VPN Client?-Solution
2023-11-22 01:43:52 - last edited 2023-12-05 12:46:37

  @Carlos79 

 

Sorry, my fault. You obviously have AX20 (US) HW v4.6 - details.

It's the same as the AX1800 that I posted earlier - it does have only a VPN Server implemented.

I believe the whole confusion comes from the fact that AX20 (US) HW v1.2 has USB port and VPN Client implemented - FW release notes.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#4
Options
6 Reply
Re:How to enable VPN Client?
2023-11-19 17:32:19

  @Carlos79 

 

You can see your exact router model on the device bottom sticker - details.

Your router model is AX1800 which doesn't have VPN Client implemented according to its specifications - details.

AX20 on the other hand is a different model, which already has the VPN Client implemented - details.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:How to enable VPN Client?
2023-11-22 01:32:45

  @terziyski 

Thank you for the response, here it is

Picture

 

Looking at the links, I see that I have the router without a USB input.

 

But why does the model on the box say Archer AX20?

  0  
  0  
#3
Options
Re:How to enable VPN Client?-Solution
2023-11-22 01:43:52 - last edited 2023-12-05 12:46:37

  @Carlos79 

 

Sorry, my fault. You obviously have AX20 (US) HW v4.6 - details.

It's the same as the AX1800 that I posted earlier - it does have only a VPN Server implemented.

I believe the whole confusion comes from the fact that AX20 (US) HW v1.2 has USB port and VPN Client implemented - FW release notes.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#4
Options
Re:How to enable VPN Client?
2023-11-22 03:01:20

  @terziyski 

 

Confusion is a mild way of putting it.

 

Well I guess it's my fault because the buyer not only has to see models, but also the different versions of the same model (sarcasm)

 

Thanks a lot tp-link

  3  
  3  
#5
Options
Re:How to enable VPN Client?
2023-11-22 03:06:25 - last edited 2023-11-22 03:27:53

  @Carlos79 

 

Choosing a router model and its HW version sometimes is a little bit tricky and it's always best to ask for advise in the community before buying.

If your retailer has a return policy and you can claim it, AX55 is a good candidate for the feature you're after.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#6
Options
Re:How to enable VPN Client?
2023-11-22 03:15:24

  @terziyski 

 

Of course, because buying a router is the same as buying a car (sarcasm obviously)

 

Anyway, thanks for the answers.

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 1591

Replies: 6

Tags

Related Articles