Home Network Community > All Threads > Archer C80. Should I use it in router mode or AP mode?
< All Threads

Archer C80. Should I use it in router mode or AP mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C80. Should I use it in router mode or AP mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C80. Should I use it in router mode or AP mode?
Archer C80. Should I use it in router mode or AP mode?
2023-11-18 14:57:44 - last edited 2023-11-20 09:32:46
Tags: #Access Point Mode #wireless router
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.2

Hello,

 

I recently purchased a new router, the Archer C80.

 

I'm considering whether to use it in router mode or AP mode. Could you please explain the differences between the two?

 

Here's my setup: My ISP provided me with a router, the Nokia G2425G-A, located in my bedroom. A LAN cable runs from one of its LAN ports to the living room, connected to the WAN port of the C80. Another LAN cable runs from one of the LAN ports of the C80 to my computer.

 

Thank you!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer C80. Should I use it in router mode or AP mode?-Solution
2023-11-19 16:47:57 - last edited 2023-11-20 09:32:46

  @Prisoneer 

 

With the topology you've described I'd use C80 in AP mode.

Thus all your devices behind Nokia G2425G-A would be in the same subnet and you'll avoid a double NAT (if C80 is in router mode).

Here's the difference between router mode and AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Archer C80. Should I use it in router mode or AP mode?-Solution
2023-11-19 16:47:57 - last edited 2023-11-20 09:32:46

  @Prisoneer 

 

With the topology you've described I'd use C80 in AP mode.

Thus all your devices behind Nokia G2425G-A would be in the same subnet and you'll avoid a double NAT (if C80 is in router mode).

Here's the difference between router mode and AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 758

Replies: 1

Tags

Access Point Mode
wireless router
Related Articles
Archer C80 in AP mode freezes my main router
932 0
Disconnections on Archer C80 in AP mode
550 1
Archer C80 in Access Mode with static IP
344 0
ARCHER C80 not working in AP Mode
412 0
Mesh with Archer C80 in AP mode
684 0
C80 speed capped at 100mbps in ap mode
296 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.