Enabling channel 13 on 2.4 ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Enabling channel 13 on 2.4 ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Enabling channel 13 on 2.4 ghz
Enabling channel 13 on 2.4 ghz
2023-11-25 05:37:50
Model: Archer C64  
Hardware Version: V1
Firmware Version: 1.13.2

Hi. I'm from Bangladesh. I'm trying to set the 2.4 ghz band on channel 13 but there's only option available from Channel 1-11. There's lots of interference on these channels in my area. Please someone help me to set it to channel 13.

 

My router: Archer C64 (US)

  0      
  0      
#1
Options
1 Reply
Re:Enabling channel 13 on 2.4 ghz
2023-11-25 06:43:50

  @tahmid8464 

 

That's a matter of software/hardware implementation - if you don't have channel 13 then there's no way to set your C64 on that channel.

On 2.4Ghz band usually non-overlapping channels are 1,6 and 11.

You could use an app like "Wi-Fi analyzer" to check for wireless interference around you and select less crowded channel in this range for best performance.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 785

Replies: 1

Related Articles