About MR600 V3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

About MR600 V3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
About MR600 V3
About MR600 V3
2023-11-27 14:57:10
Model: Archer MR600  
Hardware Version: V3
Firmware Version: 1

Hello, why i can't portforward device with 80 internal port to 8080 external port?

 

  • Router = 192.168.1.1
  • Device = 192.168.1.254
  • Protocol = TCP/UDP
  • External Port = 8080
  • Internal Port = 80
  0      
  0      
#1
Options
2 Reply
Re:About MR600 V3
2023-11-28 10:34:30

  @Moutsi 

 

Hi, you mean the settings cannot be saved or it is saved but the port doesn't open?

 

Please also check Internet IPv4 address on Advanced->Status->Internet page to see if it is public IP address or private IP address, if it is a private IP address, it means you are behind your ISP CGNAT, you will need to contact your ISP to see if they could assign you a public IP address directly.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:About MR600 V3
2023-12-06 20:22:45

  @Sunshine 

 

Also, what is this page? Shows after add DDNS server.

DDNS

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 474

Replies: 2

Related Articles