Home Network Community > All Threads > PPPoE dual stacking and disabling PPPoEv6
< All Threads

PPPoE dual stacking and disabling PPPoEv6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PPPoE dual stacking and disabling PPPoEv6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PPPoE dual stacking and disabling PPPoEv6
PPPoE dual stacking and disabling PPPoEv6
2023-12-10 19:42:33 - last edited 2023-12-18 09:53:26
Model: Deco XE75 Pro  
Hardware Version:
Firmware Version:

I've recently moved to a new ISP and I have been having issues getting IPv6 to work on my Deco.

 

I've been in contact with my ISPs support team and they say that their connections are dual stacked over IPv4 and that the reason my Deco won't connect via IPv6 is because it is using PPPoEv6 which they don't support.

Is there a way of forcing IPv6 traffic over the IPv4 connection or is this something that the Deco doesn't support.

 

Thanks in advance.

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:PPPoE dual stacking and disabling PPPoEv6-Solution
2023-12-11 15:36:43 - last edited 2023-12-18 09:53:26
Hi David, Thanks for getting back to me. My ISP is MTH Networks on the OFNL network and they don't have any public documentation but I have found the issue - I had the Get IPv6 Address setting set to auto and changing this to Non-Address has done the trick and I now have IPv6 connectivity. Hopefully this helps anyone else with the same issue when using an ISP that dual stacks their connections.
Recommended Solution
  3  
  3  
#3
Options
2 Reply
Re:PPPoE dual stacking and disabling PPPoEv6
2023-12-11 09:03:00

  @ben1390 

Hi, May I know who is your internet service provider?

Can you share a link or some reference about the ISP IPV6 internet configuration?

Have you tried "DS lite" as the internet connection type under IPV4?

Thank you very much and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:PPPoE dual stacking and disabling PPPoEv6-Solution
2023-12-11 15:36:43 - last edited 2023-12-18 09:53:26
Hi David, Thanks for getting back to me. My ISP is MTH Networks on the OFNL network and they don't have any public documentation but I have found the issue - I had the Get IPv6 Address setting set to auto and changing this to Non-Address has done the trick and I now have IPv6 connectivity. Hopefully this helps anyone else with the same issue when using an ISP that dual stacks their connections.
Recommended Solution
  3  
  3  
#3
Options

Information

Helpful: 1

Views: 581

Replies: 2

Related Articles
Disabling mesh advantages?
198 0
PPPoE dual stack on Deco X90
624 0
Problems with PPPoE Client (Dual stack)--> IPV6 connectivity
845 0
Disabling the range extender functionality?
1173 0
Disabling WiFi on TL-PA8010P
880 0
Disabling or Securing Guest Network
159 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.