Beta Software Enhancing Satellite Deco Network Stability with Deco BE11000/BE63_V2.6_1.1.7
This Article Applied to:
Deco BE11000/BE63/BE25_V2/2.6_1.1.4/1.1.5/1.1.6
Modifications and Bug Fixes:
- Improved network roaming performance in different scenarios.
- Optimized 2.4 GHz Backhaul working mechanism
- Enhanced overall wireless network connection.
- Fixed abnormal LED status after switching the main Deco.
- Fixed some security bugs.
Firmware Download Link
| Deco BE11000/BE63/BE25_V2/V2.6 | 1.1.7_build_20250307_Beta |
- Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
- How to manually update the firmware via web UI- How to Update the Firmware of Deco.
- The 1.1.7 version could revert to 1.1.5/1.1.6 directly via web UI.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP The link for FW Deco BE25_V1_1.0.17 Ready for Test! is not available?
- Copy Link
- Report Inappropriate Content
Yes, Thanks for the notification. The engineer is going to offer me a more updated version so I removed the original post.
It should be ready within the next 2-3 days. If you want to test the original version, you can find it in the private message.
It can revert to the official 1.0.13 or update to the new version later directly via web UI.
Best regards.
- Copy Link
- Report Inappropriate Content
Looks like a solid update with some useful fixes! Improved roaming and enhanced wireless connections should make a noticeable difference in daily use Personalized numerology destiny chart.
- Copy Link
- Report Inappropriate Content
@David-TP Hello everyone.. Do we know when this will be made official and no longer beta?
I'm still getting some random dropouts on WIFI during heavy use.
I've replaced my backbone cable and no longer getting speed related messages in the app..
- Copy Link
- Report Inappropriate Content
Hello!
My Deco network is built from one pcs of S7 and two M4s.
When my laptop is changing from one to an other Deco the connectio is disconnected.
This is valid still the last sw update, before it no disconnection was observed.
Please help to solve the issue!
B.R.
Nad
- Copy Link
- Report Inappropriate Content
@David-TP My dropouts seem to mainly occur when using Teams on conference calls. Almost guaranteed now... When looking at the app yesterday during the time it had happened, it reported that there were 0 connections on my 2 downstream devices in the office and lounge room - and that all devices appeared to connect to the main one in the bedroom. 30 seconds later it was all kind of back to normal again. There was no other activity in the house (streaming etc).
It was also occuring on my Mac book Air m4 - and also on the 5Ghz band. I'll moved to 6Ghz and see if there is still issues.
I think the app is about 30 seconds behind what is actually happening due to refreshes etc, but wanted to mention this.
The Deco's were still all green and nothing obvious wrong. Never any issues streaming Netflix/YouTube on many of the other devices in the house during the same time either.
Beamforming and Fast Roaming are on - Turning off Fast Roaming - what would this reduce?
Keen to get the real version of 1.1.7/
Cheers
Greg.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback. The official 1.1.7 might still need some time.
I noticed you have updated to the 1.1.7 beta already. It still didn't improve the network stability issue on the Macbook Air m4 during Team conference calls, right?
Disabling Fast roaming is usually helpful for smart home devices. But it's worth a try to see whether it helps stabilize the wireless connection.
Apart from the Macbook Air m4, did you experience similar issues on other mobile devices?
Later, I'd like to follow up on your case and ask the engineers for further assistance.
Please also check whether you can receive my email.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
As this post is mainly for Deco BE65_1.1.7, it is recommended to start a new thread here:https://community.tp-link.com/en/home/forum/edit/topic?moduleId=39 with the following details:
- Can I have the firmware version of the Deco S7 and M4?
- How about the model number of your laptop? Can you help me find the model of its wireless adapter?
- Would the wireless conenction automatically restore several seconds after disconnecting?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 1526
Replies: 8
Voters 2
