Redirect to a custom web address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Redirect to a custom web address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Redirect to a custom web address
Redirect to a custom web address
2024-01-08 11:22:33 - last edited 2024-01-31 08:08:21
Model: TL-WR940N  
Hardware Version: V6
Firmware Version: 3.20

When someone connects to the router, I want it to be automatically directed to a web address I specify for them

Such as a web page containing an advertisement

  0      
  0      
#1
Options
1 Accepted Solution
Re:Redirect to a custom web address-Solution
2024-01-08 14:13:39 - last edited 2024-01-31 08:08:21

  @mhohuh 

 

TL-WR940N   doesn't support a captive portal.

Here's a guide on how to configure portal authentication of some router models (not every model has this feature) - click on the raw down after " This Article Applies to:"

Some of TP-Link dedicated APs support a captive portal too - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Redirect to a custom web address-Solution
2024-01-08 14:13:39 - last edited 2024-01-31 08:08:21

  @mhohuh 

 

TL-WR940N   doesn't support a captive portal.

Here's a guide on how to configure portal authentication of some router models (not every model has this feature) - click on the raw down after " This Article Applies to:"

Some of TP-Link dedicated APs support a captive portal too - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 459

Replies: 1

Related Articles