Deco M4 Ports Problem After Reboot
When i was on official firmware 1.5.8 and on beta firmware 1.7.0 when i reboot my main deco so for few minutes all are ports are closed and all the connected devices can't get internet connection but after few minutes all are fine and when WAN cable is disconnected so the port (53) DNS port is closed and when WAN cable is connected again and internet is working so the port (53) DNS port is back to opened....Why all the ports are closed after reboot not immediately opened after reboot.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thank you very much for the feedback. I haven't seen this feedback before and I would be glad to forward it to the engineers for further suggestions.
Are you able to stably reproduce this issue after the reboot?
I am also curious about what device/service is on port 53. Is your local customized DNS server?
If yes, I thought maybe Deco finished the rebooting before the boot of the DNS server.
Would it help if you set the LAN DNS server under Deco APP>More>Advanced>DHCP server>DNS server to 8.8.8.8/8.8.4.4.
And Could you please do me a favor:
I haven't had Deco M4_v2 at hand yet but I was wondering whether you could find all the 1.7.0 platform new features on your Deco M4_V2:
(VPN hasn't been added to M4 yet)
Understand the Differences Among Deco Firmware Platforms
As for the WAN port notification, 1.7.0 adds an alert of the WAN link speed when the real negotiation speed is below expected. I used to see it before on other models and it will be fixed later along with an official firmware upgrade.
The maximum WAN link speed on Deco M4 is 1G and currently, it is only 100m/s since the internet bandwidth is 100m/s
Thanks a lot and wait for your reply.
- Copy Link
- Report Inappropriate Content
@David-TP Yeah i'm already using 8.8.8.8 & 8.8.4.4 DNS server on DHCP but when i reboot my main deco so all the devices are getting local DNS server first (192.168.68.1) for few minutes and then all the devices start getting Google DNS but because of (192.168.68.1) DNS port 53 is closed after reboot so devices can't get internet until they start using 8.8.8.8 & 8.8.4.4
- Copy Link
- Report Inappropriate Content
Thank you very much.
I would like to forward your case to the engineers and check whether they might have any reasonable explanations.
Please check whether you could receive my email.
Best regards.
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 Like David-TP said, please mention all the new features you got from 1.7.0 beta firmware
- Copy Link
- Report Inappropriate Content
@David-TP Yeah i got this email
- Copy Link
- Report Inappropriate Content
@David-TP Send me a message on WhatsApp....Im providing you my number in direct message and let me know when will i ready with my laptop to give you access of Anydesk
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 739
Replies: 6