Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > How to activate one mesh wifi from MR550 and RE330

< All Threads

How to activate one mesh wifi from MR550 and RE330

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to activate one mesh wifi from MR550 and RE330

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

UgoMontefiori

2024-02-25 13:28:34 - last edited 2024-02-27 08:36:53

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-02-25

How to activate one mesh wifi from MR550 and RE330

2024-02-25 13:28:34 - last edited 2024-02-27 08:36:53

Tags: #Network Connectivity #OneMesh

Model: Archer MR550 RE330

Hardware Version: V1

Firmware Version: 1.5.0 0.9.1 v0001.0 Build 230625 Rel.65051n

I connected the RE330 extender to the Archer MR550 router as a wired access point.
Archer MR550 has its own wifi and RE330 extender has its own wifi with different name.
Both access the internet but currently a client must disconnect from one wifi and connect to the other.

I can't figure out how to activate the one mesh network?

can you give me directions? Thank you very much.

Ugo

1 Accepted Solution

terziyski

LV7

2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

Posts: 7137

Helpful: 5350

Solutions: 1216

Stories: 7

Registered: 2013-10-12

Re:How to activate one mesh wifi from MR550 and RE330-Solution

2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

@UgoMontefiori

To be able to build OneMesh between those two devices you have to set the RE330 in RE mode (wireless backhaul).

Here's a video guide on how to do this.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

Posts: 7137

Helpful: 5350

Solutions: 1216

Stories: 7

Registered: 2013-10-12

Re:How to activate one mesh wifi from MR550 and RE330-Solution

2024-02-26 07:15:40 - last edited 2024-02-27 08:36:53

@UgoMontefiori

To be able to build OneMesh between those two devices you have to set the RE330 in RE mode (wireless backhaul).

Here's a video guide on how to do this.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

How to activate one mesh wifi from MR550 and RE330

How to activate one mesh wifi from MR550 and RE330

Information

Voters 0

Tags