Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

< All Threads

Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tursiops

2024-03-20 13:33:26 - last edited 2024-04-08 08:36:13

Posts: 3

Helpful: 6

Solutions: 0

Stories: 0

Registered: 2020-12-24

Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

2024-03-20 13:33:26 - last edited 2024-04-08 08:36:13

Tags: #VPN

Model: Archer MR600

Hardware Version: V2

Firmware Version: Firmware Version:‪1.7.0 0.9.1 v0001.0 Build 220826 Rel.58057n

Current ISP Version: 23021501

Hello,

I Need some help.

I Have configured DynDNS an OpenVPN Server on the MR600, but cannot establish a connection (I've configured it before in several other routers (other brands), with no problems )

I also tried two different MR600 Routers, and both fail.

Any ideas despite all Dyndns config and Openvpn configs being ok, on what maybe failing ?

1 Accepted Solution

Sunshine

2024-03-21 03:34:52 - last edited 2024-04-08 08:36:13

Posts: 7375

Helpful: 1222

Solutions: 940

Stories: 0

Registered: 2018-12-17

Re:Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)-Solution

2024-03-21 03:34:52 - last edited 2024-04-08 08:36:13

@Tursiops

Hi, please check the Internet IPv4 address on Advanced->Status page->Internet page to see if it is public IP address, if not, it means you are behind your ISP CGNAT, that is why you are not able to connect the VPN Server from external network.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

Information

Helpful: 0

Replies: 1

Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

Can't Connect Via OpenVPN with DYNDNS to MR600 (Tried with 2 different MR600)

Information

Voters 0

Tags