TL-MR6400 router not working

TL-MR6400 router not working

TL-MR6400 router not working
TL-MR6400 router not working
2024-03-24 15:07:03 - last edited 2024-04-08 08:34:48
Model: TL-MR6400  
Hardware Version: V2
Firmware Version: TL-MR6400

All LED's not glowing, it says not connected to Internet 

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-MR6400 router not working -Solution
2024-03-26 10:13:17 - last edited 2024-04-08 08:34:48

  @Sesha 

 

Do you mean there are no lights on? Please make sure it is using the original power adapter, or try another power adapter with the same specification.

Try different wall sockets, also try to reset the device to factory defaults by holding the reset button for about 10s.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:TL-MR6400 router not working -Solution
2024-03-26 10:13:17 - last edited 2024-04-08 08:34:48

  @Sesha 

 

Do you mean there are no lights on? Please make sure it is using the original power adapter, or try another power adapter with the same specification.

Try different wall sockets, also try to reset the device to factory defaults by holding the reset button for about 10s.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:TL-MR6400 router not working
2024-06-21 18:53:24

  @Sesha 

  0  
  0  
#3
Options
Re:TL-MR6400 router not working
2024-06-21 18:54:19
Yes
  0  
  0  
#4
Options
Re:TL-MR6400 router not working
2024-06-21 18:54:26
Yes chinbahadur346@gmail.com
  0  
  0  
#5
Options
Re:TL-MR6400 router not working
2024-09-02 08:07:35 - last edited 2024-09-02 08:09:50

  @Sesha 

It sounds like you're experiencing a frustrating issue with your TL-MR6400 router. I had a similar problem a while back where none of the LED's were glowing, and the router showed it wasn't connected to the internet. After some troubleshooting, I found that a simple reset of the router helped restore connectivity.

On a positive note, once I got everything working again, my internet connection was stable enough to use apps like GB WhatsApp which are downloaded from gbwhata seamlessly, even for video calls and large file transfers. If you haven’t tried resetting the router or updating the firmware, those steps might help resolve the issue. Hope this helps, and you’re back online soon!

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 620

Replies: 5

Related Articles