Home Network Community > All Threads > Access Point Mode - WiFi LED off.
< All Threads

Access Point Mode - WiFi LED off.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access Point Mode - WiFi LED off.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access Point Mode - WiFi LED off.
Access Point Mode - WiFi LED off.
2024-04-07 00:47:21 - last edited 2024-04-08 06:32:50
Tags: #RE815XE
Model: RE815XE  
Hardware Version: V1
Firmware Version: 1.0.6

Hello

 

I purchased 3x RE815XE to go with my Archer AXE75 router.

 

I have hardwired all extenders into my router and have set them all to Access Point mode.

 

On each extender, on the side, all the lights (eg: power, 2.4G, 5G, 6G) light up, except the Wifi LED.  It remains off on all three units.

 

I have tried pressing the WPS button on the side and that causes the Wifi LED to start flashing (slowly) and then toward the end flash more rapidly, before stopping flashing entirely.

 

Does anyone know how to make these access points Wifi accessible?  That was the whole point in buying them and there is scant information in that manual.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Access Point Mode - WiFi LED off.-Solution
2024-04-07 01:57:36 - last edited 2024-04-08 06:32:50

  @ABaus 

 

Hi,

 

It seems the explanations for the LEDs in the user manual apply for range extender mode, but there is no mention what they are in access point mode.

 

Anyway, I have another model from TP-Link's RE product family and in "Access Point Mode" the 2.4G and 5G LEDs indicate whether each radio is switched ON or OFF (i.e. broadcasting a Wi-Fi signal or not broadcasting a Wi-Fi signal)
The "Wi-Fi" (or "Signal") LED is always off in Access Point Mode.

 

So, I would say the LED status of your RE815XE's is exactly as it should be.

 

How have you established that the RE815XE are not sending out signals on any of the three bands?

 

Have you already changed the SSIDs from their default values TP-Link_Extender, TP-Link_Extender_5GHz and TP-Link_Extender_6GHz? If not, then I would expect them to show up on your Wi-Fi devices with those names.
 

Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Access Point Mode - WiFi LED off.-Solution
2024-04-07 01:57:36 - last edited 2024-04-08 06:32:50

  @ABaus 

 

Hi,

 

It seems the explanations for the LEDs in the user manual apply for range extender mode, but there is no mention what they are in access point mode.

 

Anyway, I have another model from TP-Link's RE product family and in "Access Point Mode" the 2.4G and 5G LEDs indicate whether each radio is switched ON or OFF (i.e. broadcasting a Wi-Fi signal or not broadcasting a Wi-Fi signal)
The "Wi-Fi" (or "Signal") LED is always off in Access Point Mode.

 

So, I would say the LED status of your RE815XE's is exactly as it should be.

 

How have you established that the RE815XE are not sending out signals on any of the three bands?

 

Have you already changed the SSIDs from their default values TP-Link_Extender, TP-Link_Extender_5GHz and TP-Link_Extender_6GHz? If not, then I would expect them to show up on your Wi-Fi devices with those names.
 

Recommended Solution
  1  
  1  
#2
Options
Re:Access Point Mode - WiFi LED off.
2024-04-07 04:09:26

  @woozle thank you for our reply.  I think you are 100% right.

 

The fact the 2G, 5G and 6G all show suggests the unit is putting out a wifi band.

 

I was just thrown by the wifi LED being out.

 

Thank you

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 703

Replies: 2

Tags

RE815XE
Related Articles
WiFi 6 in access point mode
1133 0
About access point mode
857 0
Is there a access point mode?
1302 0
Access Point v WiFi Router mode
155 0
Access Point mode v WiFi Router.
101 0
Access Point Mode or Router Mode
1087 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.