Archer BE800 sends DHCP Requests every 30 seconds

Archer BE800 sends DHCP Requests every 30 seconds

Archer BE800 sends DHCP Requests every 30 seconds
Archer BE800 sends DHCP Requests every 30 seconds
2024-05-03 01:22:20 - last edited 2024-05-06 09:27:20
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20240227 rel. 33191

I am running the Archer BE800 in Access Point mode. Connection type is Dynamic IP and the DHCP Server mode is Auto.

 

My router assigns the BE800 an IP address which is valid for 12 hours. Yet the BE800 is refreshing the DHCP lease about every 30 seconds:

 

2024-05-03 04:09:57 DHCPC INFO [20413] receive ack from server with ip 10.x.x.x, options(serverid=10.x.x.x;lease=43200;subnet=255.255.255.0;router=10.x.x.x;dns=10.x.x.x;)

 

2024-05-03 04:09:57 DHCPC INFO [20413] send select request with options(cliid=01/xx:xx:xx:xx:xx:xx:;)

 

2024-05-03 04:09:57 DHCPC INFO [20413] 1/2 lease passed, enter renewing state

 

2024-05-03 04:09:23 DHCPC INFO [20413] receive ack from server with ip 10.x.x.x, options(serverid=10.x.x.x;lease=43200;subnet=255.255.255.0;router=10.x.x.x;dns=10.x.x.x;)

 

2024-05-03 04:09:23 DHCPC INFO [20413] send select request with options(cliid=01/xx:xx:xx:xx:xx:xx:;)

 

2024-05-03 04:09:23 DHCPC INFO [20413] 1/2 lease passed, enter renewing state

 

2024-05-03 04:08:49 DHCPC INFO [20413] receive ack from server with ip 10.x.x.x, options(serverid=10.x.x.x;lease=43200;subnet=255.255.255.0;router=10.x.x.x;dns=10.x.x.x;)

 

2024-05-03 04:08:49 DHCPC INFO [20413] send select request with options(cliid=01/xx:xx:xx:xx:xx:xx:;)

 

Please fix.

  0      
  0      
#1
Options
1 Accepted Solution
Archer BE800 sends DHCP Requests every 30 seconds (addendum)-Solution
2024-05-03 08:32:46 - last edited 2024-05-03 20:03:43

  @CongoKing 

 

Set a static IP address on its LAN interface and set its DHCP server to OFF to mitigate this - it's normal behavior in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
3 Reply
Archer BE800 sends DHCP Requests every 30 seconds (addendum)
2024-05-03 01:36:53

It even does that when the Archer BE800 IP is set to Static IP (Access Point mode). I wonder why it is still flooding the router with DHCP requests in this case. I am starting to like this device...

 

Please fix.

  0  
  0  
#2
Options
Archer BE800 sends DHCP Requests every 30 seconds (addendum)-Solution
2024-05-03 08:32:46 - last edited 2024-05-03 20:03:43

  @CongoKing 

 

Set a static IP address on its LAN interface and set its DHCP server to OFF to mitigate this - it's normal behavior in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
Archer BE800 sends DHCP Requests every 30 seconds (addendum)
2024-05-03 20:05:31
That fixed the issue! Thanks terziyski - you are the best!
  0  
  0  
#4
Options