Home Network Community > All Threads > Archer AX95, random NAT-related resets of router
< All Threads

Archer AX95, random NAT-related resets of router

12

Archer AX95, random NAT-related resets of router

Archer AX95, random NAT-related resets of router
Archer AX95, random NAT-related resets of router
2024-05-07 15:48:07
Model: Archer AX95  
Hardware Version: V1
Firmware Version: 1.0.4 Build 20230620 rel.40495(4555)

A brand new Archer AX95 is experiencing random NAT-related resets, and the following appears in the log (example):

 

NAT Forwarding (Port Forwarding/Port Triggering) is not active, only UPnP is used.

When these resets occur, internet connectivity is not lost, and the light on the router shines a uniform blue.

  2      
 
  2      
 
#1
Options
14 Reply
Re:Archer AX95, random NAT-related resets of router
2024-05-08 07:59:44

  @Maciej 

 

Hi, thanks for posting question on our community.

Can you go to Save Log and share us the complete log? Then we may better analysis the issue.

According the log screenshot and the description, it is too hard to find apparent issue like unstable connection or auto-reset.

Now does the router work properly? If you do not check the log,can you feel any performance problem?

 

 

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  1  
  1  
#2
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-08 09:16:20

  @Marvin_S 

Hello,

Thank you for your response.

Next time the problem occurs, if at all, I'll save the full log - I though a screenshot of the log would be enough.

Now the router works properly, and, as I mentioned in my previous post, there was no discernible interruption in internet service when the reset occurred.

The only thing that has come to my mind is that I had HDDs connected to both USB ports on the router - the 2.0 and the 3.0.

Since during the reset a backup job was being sent from my PC to the HDD connected to the USB 2.0 port, and just to rule out a potential overload of the processor (although, admittedly, this may appear far-fetched), I have disconnected this HDD and instead attached both HDDs to the USB 3.0 port through a powered USB hub. I'll see if this helps any, but I have a feeling it is irrelevant. We'll see.

  0  
  0  
#3
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-09 08:43:49

  @Maciej 

 

Ok, please take your time. BTW, please also observe the LED changes next time the issue happens.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  1  
  1  
#4
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-09 09:27:17

  @Marvin_S 

Of course.

By the way - do you think the HDD connected to the USB 2.0 port could have had any influence here?

  0  
  0  
#5
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-10 10:57:33

  @Maciej 

 

Usually not, you may disconnect it for some time to take a further observation.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#6
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-10 14:26:33

  @ماسيج and me حزين

  0  
  0  
#7
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-13 15:02:09

  @Marvin_S @mr_goonf 

The problem has just reoccurred, I'm attaching the full log:

 

####################################################################
#                  Archer AX95 System Log
# Time = 2024-05-13 16:51:54
# H-Ver = 1.0.0 ; S-Ver = 1.0.4 Build 20230620 rel.40495
# LAN: I = 192.168.0.1 ; M = 255.255.255.0 ; MAC = xx:xx:xx:xx:xx:xx 
# WAN: W = dhcp ; I = xx.xx.xxx.xxx ; M = 255.255.255.0 ; MAC = xx:xx:xx:xx:xx:xx 
#      G = xx.xx.xxx.x ; D1 = 217.113.224.134 ; D2 = 217.113.224.35 
# Clients connected: 7 ; WI-FI : 5 
####################################################################
2024-05-13 15:33:10 upnp[9255]: <6> 217504 Service start
2024-05-13 15:33:10 upnp[9255]: <6> 217505 Service stop
2024-05-13 15:33:05 remote-management[8849]: <6> 282505 Service stop
2024-05-13 15:32:53 nat[7485]: <6> 211501 Initialization succeeded
2024-05-13 15:32:53 nat[7485]: <6> 211501 Initialization succeeded
2024-05-13 15:32:44 nat[6515]: <6> 211501 Initialization succeeded
2024-05-13 15:32:44 nat[6515]: <6> 211501 Initialization succeeded
2024-05-11 17:55:15 upnp[15753]: <6> 217504 Service start
2024-05-11 17:55:15 upnp[15753]: <6> 217505 Service stop
2024-05-11 17:55:14 remote-management[15428]: <6> 282505 Service stop
2024-05-11 17:55:06 nat[13467]: <6> 211021 IPSEC ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 L2TP ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 PPTP ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 SIP ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 RTSP ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 H323 ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 TFTP ALG enabled
2024-05-11 17:55:06 nat[13467]: <6> 211021 FTP ALG enabled
2024-05-11 17:55:02 nat[13467]: <6> 211501 Initialization succeeded
2023-06-20 00:01:01 nat[13467]: <6> 211501 Initialization succeeded
2023-06-20 00:00:52 qos[12043]: <6> 259504 Service start
2023-06-20 00:00:52 qos[12043]: <6> 259503 Function disabled
2023-06-20 00:00:48 traffic-stats[10989]: <6> 269504 Service start
2023-06-20 00:00:44 factory-reset[10336]: <6> 284504 Service start
2023-06-20 00:00:43 parental-control[10122]: <6> 229504 Service start
2023-06-20 00:00:43 parental-control[10122]: <6> 229502 Function enabled
2023-06-20 00:00:42 access-control[9874]: <6> 239504 Service start
2023-06-20 00:00:42 access-control[9874]: <5> 239606 Flush conntrack table succeeded
2023-06-20 00:00:42 access-control[9874]: <6> 239502 Function enabled
2023-06-20 00:00:41 nat[9420]: <7> 211001 Flush conntrack
2023-06-20 00:00:41 nat[9420]: <6> 211502 Function enabled
2023-06-20 00:00:41 nat[9420]: <5> 211051 Create NAT chain succeeded
2023-06-20 00:00:40 nat[9420]: <6> 211501 Initialization succeeded
2023-06-20 00:00:40 nat[9420]: <6> 211501 Initialization succeeded
2023-06-20 00:00:39 basic-security[9176]: <6> 219504 Service start
2023-06-20 00:00:39 basic-security[9176]: <5> 219606 Flush conntrack table succeeded
2023-06-20 00:00:38 firewall[7364]: <6> 209504 Service start
2023-06-20 00:00:34 imb[8318]: <6> 218507 Daemon connection succeeded
2023-06-20 00:00:34 imb[8318]: <6> 218506 Config interface initialization succeeded
2023-06-20 00:00:34 imb[8318]: <6> 218011 ARP Binding enabled
2023-06-20 00:00:34 imb[8318]: <6> 218506 Config interface initialization succeeded
2023-06-20 00:00:34 imb[8318]: <6> 218501 Initialization succeeded
2023-06-20 00:00:32 upnp[8036]: <6> 217504 Service start
2023-06-20 00:00:32 upnp[8036]: <6> 217505 Service stop
2023-06-20 00:00:30 remote-management[7733]: <6> 282505 Service stop
2023-06-20 00:00:00 time-settings[1712]: <6> 279504 Service start

  1  
  1  
#8
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-14 09:50:30

  @Maciej 

 

Hi, can I confirm again, how you found the issue, which caused you to check the system log?

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#9
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-14 10:10:44

  @Marvin_S 

Hi,

I just took a routine glance at the log, that is all.

As I mentioned in my previous posts, there was no interruption in internet service. Just this weird NAT reset.

  0  
  0  
#10
Options
Re:Archer AX95, random NAT-related resets of router
2024-05-14 17:25:35

  @ماسيج 

2024-05-14 19:49:39 NAT INFO [9049] IPSEC ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] L2TP ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] PPTP ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] SIP ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] RTSP ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] H323 ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] TFTP ALG enabled

2024-05-14 19:49:39 NAT INFO [9049] FTP ALG enabled

2023-09-06 00:00:34 NAT INFO [9049] Initialization succeeded

2023-09-06 00:00:34 NAT INFO [9049] Initialization succeeded

2023-09-06 00:00:16 NAT DEBUG [6835] Flush conntrack

2023-09-06 00:00:16 NAT INFO [6835] Function enabled

2023-09-06 00:00:16 NAT NOTICE [6835] Create NAT chain succeeded

2023-09-06 00:00:16 NAT INFO [6835] Initialization succeeded

2023-09-06 00:00:15 NAT INFO [6835] Initialization succeeded

  0  
  0  
#11
Options
12

Information

Helpful: 2

Views: 799

Replies: 14

Related Articles
Dual-WAN on Archer AX95 (AX7800)
1286 1
ARCHER AX95
383 1
Router resets
229 0
OneMesh on Archer AX95 v1.0
699 0
Archer AX95 new firmware?
654 1
Archer AX95 (AX7800) to use multiple Archer AX6000 as APs
971 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.