Home Network Community > All Threads > Archer AX6000 setup on BT
< All Threads

Archer AX6000 setup on BT

Archer AX6000 setup on BT

Archer AX6000 setup on BT
Archer AX6000 setup on BT
2024-05-08 15:33:24 - last edited 2024-05-10 11:18:21
Tags: #Network Connectivity
Model: Archer AX6000  
Hardware Version: V2
Firmware Version:

I am trying to set up my Archer AX6000. From the BT ONT I have plugged the Ethernet cable from it into the 2.5GHz port on the router and I have a CAT 8 cable going from the router to an Anker device. The router has solid red light which indicates No Internet. What am I doing wrong?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer AX6000 setup on BT-Solution
2024-05-08 16:45:22 - last edited 2024-05-10 11:18:21

  @christoskelton 

 

Get the ethernet cable from the AX6000 kit and use it to connect you computer to AX6000 LAN port.

Any Cat 5E will suffice to connect AX6000 LAN port. Here's how to find your AX6000 IP address.

Here's how to log in AX6000 WebGUI.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#5
Options
5 Reply
Re:Archer AX6000 setup on BT
2024-05-08 16:13:20

  @christoskelton 

 

Post your network status screenshot:

 

 

along with its ethernet port status:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer AX6000 setup on BT
2024-05-08 16:20:23 - last edited 2024-05-10 11:18:08

  @terziyski 

 

I cannot sign in to 192.168.0.1 to send a screenshot. 

The CAT 8 cable is brand new. 

I have plugged the Anker device straight into my Macbook Air too.

 

  0  
  0  
#3
Options
Re:Archer AX6000 setup on BT
2024-05-08 16:44:05

  @terziyski This is what I see for network Map - WiFi is working but not Ethernet?

  0  
  0  
#4
Options
Re:Archer AX6000 setup on BT-Solution
2024-05-08 16:45:22 - last edited 2024-05-10 11:18:21

  @christoskelton 

 

Get the ethernet cable from the AX6000 kit and use it to connect you computer to AX6000 LAN port.

Any Cat 5E will suffice to connect AX6000 LAN port. Here's how to find your AX6000 IP address.

Here's how to log in AX6000 WebGUI.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#5
Options
Re:Archer AX6000 setup on BT
2024-05-09 04:21:41

  @terziyski 

 

Thanks for your help. 

 

I'm using the cable provided in the box and it is now working.

 

One of the ports on the router seems to have an issue because when I plug an Ethernet cable into it the router stops working so I am not using that port. I'm using the other 7 ports.

 

I have set up ipv6 too.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 609

Replies: 5

Tags

Network Connectivity
Related Articles
Archer AX6000 BT and IPV6
1585 0
OneMesh for Archer AX6000
2944 1
Archer AX6000 OneMesh
2387 1
Archer AX6000 2.4GHz not working
913 0
Archer AX6000 use as repeater
4909 0
Archer AX6000 WebUI problem
1208 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.