Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Getting the firmware version of the PG2400P powerline adapter?

< All Threads

Getting the firmware version of the PG2400P powerline adapter?

Getting the firmware version of the PG2400P powerline adapter?

Getting the firmware version of the PG2400P powerline adapter?

2024-05-15 14:09:20 - last edited 2024-05-17 07:04:50

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-15

Getting the firmware version of the PG2400P powerline adapter?

2024-05-15 14:09:20 - last edited 2024-05-17 07:04:50

Model: PG2400P KIT

Hardware Version:

Firmware Version:

I'm trying to find out what firmware version my TP Link PG2400P Powerline Kit is running.

How do I do that?

I've installed the utility and it doesn't seem to help. Screenshot it below.

The FAQ doesn't give any useful info either. https://www.tp-link.com/uk/support/faq/315/

I'd really appreciate your help.

0

0

#1

1 Accepted Solution

LV5

2024-05-16 20:19:20 - last edited 2024-05-17 07:04:50

Posts: 2780

Helpful: 1859

Solutions: 474

Stories: 0

Registered: 2020-05-01

Re:Getting the firmware version of a powerline adapter?-Solution

2024-05-16 20:19:20 - last edited 2024-05-17 07:04:50

@Andrey_Simonov

Hi,

According to another user who posted this thread https://community.tp-link.com/en/home/forum/topic/668070 these G.hn Powerline adapters are to be managed via an internal web management page that can be accessed by entering each Powerline adapter's IP address in a web browser. You should be able to determine the IP addresses of the Powerline adapters via your router's client list.

Recommended Solution

1

1

#4

4 Reply

LV7

2024-05-15 22:25:16 - last edited 2024-05-17 07:04:36

Posts: 7017

Helpful: 5225

Solutions: 1159

Stories: 7

Registered: 2013-10-12

Re:Getting the firmware version of a powerline adapter?

2024-05-15 22:25:16 - last edited 2024-05-17 07:04:36

@Andrey_Simonov

Use this guide for updating your PLC firmware:

When you hover your mouse over a device the (Basic) icon should appear.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

0

0

#2

LV1

2024-05-16 06:34:39

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-15

Re:Getting the firmware version of a powerline adapter?

2024-05-16 06:34:39

@terziyski thanks, but where is this icon situated please? Are you using the Windows version of the app?

As you can see in my screenshot, this icon is not there and it doesn't appear if you select a node.

0

0

#3

LV5

2024-05-16 20:19:20 - last edited 2024-05-17 07:04:50

Posts: 2780

Helpful: 1859

Solutions: 474

Stories: 0

Registered: 2020-05-01

Re:Getting the firmware version of a powerline adapter?-Solution

2024-05-16 20:19:20 - last edited 2024-05-17 07:04:50

@Andrey_Simonov

Hi,

According to another user who posted this thread https://community.tp-link.com/en/home/forum/topic/668070 these G.hn Powerline adapters are to be managed via an internal web management page that can be accessed by entering each Powerline adapter's IP address in a web browser. You should be able to determine the IP addresses of the Powerline adapters via your router's client list.

Recommended Solution

1

1

#4

LV1

2024-05-17 07:03:47 - last edited 2024-05-17 07:09:08

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-15

Re:Getting the firmware version of a powerline adapter?

2024-05-17 07:03:47 - last edited 2024-05-17 07:09:08

@woozle thank you so much for linking this thread. It's even easier than the user suggests: the 'website' link in the tpPLC Utility for Mac takes you directly to the powerline adapter's website!

I now found my firmware successfully: it's 1.0.3, so I don't need to upgrade.

0

0

#5

2024-05-15 14:09:20 - last edited 2024-05-17 07:04:50

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-05-15

Information

Helpful: 0

Views: 525

Replies: 4