Archer C54
Hi experts. I just bought Archer C54 for my office. But after i configured QoS feature, feels like not work. Clients still consume maximum bandwidth, not what i set. It different than my MR3020 or WR840 which they have simple configuration and work as i config.
Please assist me if i'm wrong. Here picture of my config.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
QoS feature doesn't do the same as Bandwidth Limit. My advise - disable QoS as it won't work as you expected in your case.
Here's how the QoS should be configured.
If you're after speed limit pf devices connected to your router, this is not implemented in Archer C54. Archer C64 can do this - details.
- Copy Link
- Report Inappropriate Content
QoS feature doesn't do the same as Bandwidth Limit. My advise - disable QoS as it won't work as you expected in your case.
Here's how the QoS should be configured.
If you're after speed limit pf devices connected to your router, this is not implemented in Archer C54. Archer C64 can do this - details.
- Copy Link
- Report Inappropriate Content
Thank you for answer. but i don't want set per device. i want only set globally for all clients, it means when i have 30 Mbps from provider, so i set only 20 Mbps in Archer C54. but as you said, maybe QoS feature in C54 is different than MR3020 or WR840. now i disable this feature which is not too disturbing my game and hope TP-Link can provide this feature in new firmware.
Thank you
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 571
Replies: 2
Voters 0
No one has voted for it yet.