I'm encountering an issue while trying to establish a Wi-Fi connection on the 2.4GHz band of my Mercusys Router MR70X v1.0, running firmware version 1.1.0 Build 20240311 Rel. 52779(5553). The problem occurs only when I set a password on 2.4GHz SSID with encryption; the Wi-Fi connection fails, dropping shortly after attempting to connect. However, if I set the encryption to None, the connection works fine. I've tested other encryption settings, and the issue persists only with the 2.4GHz band when using a password. I've tried adjusting the channel width, channel, transmit power, mode, and even performed a factory reset, but nothing has resolved the issue. I contacted Mercusys Support two weeks ago but have yet to receive a response. I believe the router is running the latest firmware, and I am unable to downgrade to an earlier version. Additionally, the same issue occurs with the Guest 2.4GHz SSID. Clients are unable to connect when a password is set on the 2.4GHz band. If a password is configured, the connection fails, just as with the main 2.4GHz SSID.For your convenience, I have attached screenshots of the configuration settings on the MR70X router's Wireless configuration page.