Home Network Community > All Threads > Internet Connection
< All Threads

Internet Connection

12

Internet Connection

Internet Connection
Internet Connection
2024-09-11 06:45:21
Tags: #Network Connectivity
Model: Deco X50-DSL  
Hardware Version:
Firmware Version: 104

I have a problem. Once or two times in a week my internet connection is losing. It is being fixed by power off and after Power on OR Restart by mobile application. There is no written problem in deco application in mobile. There is no problem by internet provider.

  0      
 
  0      
 
#1
Options
11 Reply
Re:Internet Connection
2024-09-12 03:52:53

  @arda_alc 

Hi,

 

How about the light status on the Deco units when the internet drops?

 

Please change the DNS settings on Deco. 

And you can also test different Ethernet cable and Ethernet ports.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Internet Connection
2024-09-12 05:14:38
Thanks your interest Light status is not changing , it is always green. I tried different cables. Actually I m using just dsl cable. So you want me try to DNS setting. What should it be ? is there any reccomandation ?
  0  
  0  
#3
Options
Re:Internet Connection
2024-09-13 20:38:59

  @Sunshine 

 

I tried but still problem is going on. I m bored. Why is this happennig. Suddenly internet is losing without any error or message. it is being fixed restart. Whyyyy

  0  
  0  
#4
Options
Re:Internet Connection
2024-09-13 20:45:13

  @Sunshine 

why am ı getting so much error with deco? 

I was delighted with my 8 years old tp link modem. Just I want to try deco but ı m totally regret.

 

 

Fri Sep 13 23:35:41 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:35:44 2024 daemon.err nrd[13249]: triggerMonSteering: Failed to get uplink rssi for 36:BA:1E:4D:CA:93

Fri Sep 13 23:35:44 2024 daemon.err bandwidth_contr: get mode: 11AHE160

 

Fri Sep 13 23:35:47 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:35:47 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:35:51 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:35:57 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:01 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:01 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:03 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:06 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:06 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:09 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:12 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:12 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:14 2024 daemon.err bandwidth_contr: get mode: 11AHE160

 

Fri Sep 13 23:36:15 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:19 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:19 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:21 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:24 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:24 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:27 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:30 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:30 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:33 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:36 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:36 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:39 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:42 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:42 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:44 2024 daemon.err bandwidth_contr: get mode: 11AHE160

 

Fri Sep 13 23:36:44 2024 daemon.err bandwidth_contr: Sending TIPC data. Total 20 bytes.

Fri Sep 13 23:36:44 2024 daemon.err bandwidth_contr: get mode: 11AHE160

 

Fri Sep 13 23:36:45 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:48 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:48 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:51 2024 daemon.err nrd[13249]: ar_pat_calc_cand_datarate[line 627]: No enough AP info exists

Fri Sep 13 23:36:54 2024 daemon.err nrd[13249]: estimatorCmnHandleBeaconReportEvent: Invalid beacon report for 52:BC:9B:A7:A4:48

Fri Sep 13 23:36:54 2024 daemon.err nrd[13249]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Fri Sep 13 23:36:57 2024 daemon.err hostapd: hostapd_notif_disassoc num_sta 1

Fri Sep 13 23:36:57 2024 daemon.err hostapd: hostapd_notif_disassoc num_sta== 1 , do wpa_auth_sm_event

Fri Sep 13 23:36:57 2024 daemon.err hostapd: wpa_auth_sm_event do WPA_LAST_STA

Fri Sep 13 23:36:57 2024 daemon.err client_mgmt: wireless client associate or disassociate.

Fri Sep 13 23:36:57 2024 daemon.err client_mgmt: client_mac:36-BA-1E-4D-CA-93, client_ifname:ath1, client_action:disassociate

Fri Sep 13 23:36:57 2024 daemon.err client_mgmt: client(36-BA-1E-4D-CA-93) disassocaite by if(ath1).

Fri Sep 13 23:36:59 2024 daemon.err nrd[13249]: ar_pat_fill_stainfo[line 140]: Failed to find serving BSS for 36BA1E4DCA93

Fri Sep 13 23:37:00 2024 daemon.err client_mgmt: wireless client associate or disassociate.

Fri Sep 13 23:37:00 2024 daemon.err client_mgmt: client_mac:36-BA-1E-4D-CA-93, client_ifname:ath1, client_action:associate

Fri Sep 13 23:37:00 2024 daemon.err client_mgmt: client(36-BA-1E-4D-CA-93) assocaite by if(ath1).

  0  
  0  
#5
Options
Re:Internet Connection
2024-09-14 08:25:36

  @arda_alc 

Hi,

Thanks for your information.

 

I regret that I didn't make it clear.

For your case, please change the DNS here: More>Advanced>DHCP server. And please change primary DNS to 8.8.8.8 and the secondary DNS to 8.8.4.4.

 

If you have another DSL line, you can also test it.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:Internet Connection
2024-09-14 08:39:01

  @Sunshine 

İ m happy with your care. But when i Change my dns , my internet speed is slowing. And i tried another dsl line there is no change. 

İ have an advice. Some other modem have a feature in their interface which is like "restart between 3 am and 5 am" . İf there is like this feature in your interface it would be beneficial. 

 

İ m still waiting for your another advices...

  0  
  0  
#7
Options
Re:Internet Connection
2024-09-24 05:51:15 - last edited 2024-09-30 04:23:00

  @arda_alc
The only way I’ve been able to fix it is by either powering off the Deco units and turning them back on stylo.pk, or by restarting them through the mobile app. The Deco app itself doesn’t show any errors or issues, and my internet provider has confirmed there are no problems on their end.  
 

  1  
  1  
#8
Options
Re:Internet Connection
2024-09-24 06:38:27

  @harryrex 

Then problem is just about deco modem. Am i right. İf i understood correctly i will send my modem to warranty. Because this problem is not acceptable.

  0  
  0  
#9
Options
Re:Internet Connection
2024-09-24 07:22:47

  @arda_alc on my x50-5g there is a setting "reboot schedule" that will do what you want.

  1  
  1  
#10
Options
Re:Internet Connection
2024-09-24 07:37:56

  @Allthe 

Actually i looked for like what you said but i could not find. Can you send a picture or say exactly where it is?

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 463

Replies: 11

Tags

Network Connectivity
Related Articles
DECO X50 DSL INTERNET CONNECTION LOSING PROBLEM
199 0
No internet connection
488 0
Iphone has no internet connection
2283 1
DECO X50-DSL dropping connections frequently
71 0
No internet connection
659 0
No internet connection
845 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.