Deco M4 very bad speed after enable IPTV Bridge

Deco M4 very bad speed after enable IPTV Bridge

Deco M4 very bad speed after enable IPTV Bridge
Deco M4 very bad speed after enable IPTV Bridge
2024-09-12 16:16:48 - last edited 2024-09-18 09:26:39
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.6.1

When i enable IPTV Bridge mode so my internet speed goes down from 100 Mbps to 4-5 Mbps both download and upload and slow browsing and too much latency fluctuations in online games. Here is a video link.

 

https://youtube.com/shorts/H-TppCX_e8M

  1      
  1      
#1
Options
1 Accepted Solution
Re:Deco M4 very bad speed after enable IPTV Bridge-Solution
2024-09-14 03:56:11 - last edited 2024-09-18 09:26:39

  @ARGamingPK1 

Hi, Are you able to constantly reproduce this issue?

Apart from the 5GHz WiFi speed, can you help me test the Ethernet connection speed as well since I wonder whether it only affects the wireless connection?

Here is the latest beta firmware 1.6.2 based on the official 1.6.2 version:

Deco M4_V2 1.6.2_build_20240828_Beta

Can you also test whether it helps with the IPTV issue?

Thank you very much and best regards.

 

Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:Deco M4 very bad speed after enable IPTV Bridge
2024-09-13 08:35:52 - last edited 2024-09-13 10:44:08

  @ARGamingPK1 

Hi, Nice to see you again.

May I know who your internet service provider is?

I saw the speed test is via Wi-Fi. Have you also tested the Ethernet connection speed?

By the way, if you just enabled the IPTV Bridge without plugging any STB box, would the internet speed decline as well?

Wait for your reply and best regards.

 

  0  
  0  
#2
Options
Re:Deco M4 very bad speed after enable IPTV Bridge
2024-09-13 10:43:57

  @David-TP Yea no IPTV STB box connected i just enabled IPTV Bridge and my speed goes down to 5 Mbps from 100 Mbps before that there is no problem to test speed on 5 GHz wifi always getting stable speed without IPTV bridge and my ISP is Transworld Home 

  0  
  0  
#3
Options
Re:Deco M4 very bad speed after enable IPTV Bridge-Solution
2024-09-14 03:56:11 - last edited 2024-09-18 09:26:39

  @ARGamingPK1 

Hi, Are you able to constantly reproduce this issue?

Apart from the 5GHz WiFi speed, can you help me test the Ethernet connection speed as well since I wonder whether it only affects the wireless connection?

Here is the latest beta firmware 1.6.2 based on the official 1.6.2 version:

Deco M4_V2 1.6.2_build_20240828_Beta

Can you also test whether it helps with the IPTV issue?

Thank you very much and best regards.

 

Recommended Solution
  1  
  1  
#4
Options
Re:Deco M4 very bad speed after enable IPTV Bridge
2024-10-19 22:08:06

  @David-TP After this update IPTV bridge is not working anymore.

  0  
  0  
#8
Options

Information

Helpful: 1

Views: 333

Replies: 4

Related Articles