Deco X50 Integration into FRITZ!Box 7530 AX Mesh

Deco X50 Integration into FRITZ!Box 7530 AX Mesh

Deco X50 Integration into FRITZ!Box 7530 AX Mesh
Deco X50 Integration into FRITZ!Box 7530 AX Mesh
2024-09-25 09:01:02
Model: Deco X50  
Hardware Version:
Firmware Version:

Hi all!

 

recently i received my new FRITZ!Box 7530 AX and two Deco X50 from my service provider. I understood that I can setup one X50 that is connected via LAN as my Mesh Master, and use the second one as Mesh Repeater. Doing so, i need to disable the WIFI of my FritzBox. 

 

As the FritzBox also supports mesh, I am wondering if it is also possible to use the FritzBox as my Mesh Master and both X50 as Mesh Repeaters. I would prefer this setup due to the fact, that i would have three active WIFI devices allowing better coverage of my home. 

 

I would be happy if you could help me in realizing that setup!

 

best,

SebSch

  0      
  0      
#1
Options
1 Reply
Re:Deco X50 Integration into FRITZ!Box 7530 AX Mesh
2024-09-26 03:26:51

  @SebSch 

Hi, welcome to the community.

Many Brands would have their own dedicated Mesh protocol. Currently, I only noticed AVM recommended using their own models to establish a Mesh network:

https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-7530/3361_Which-FRITZ-products-support-Mesh/

 

So I'm afraid you might still need to wire the first main Deco via an Ethernet cable to the FRITZ!Box 7530

Thank you very much and best regards.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 197

Replies: 1

Related Articles