Deco X50-5G does not lock the selected bands
Hi to all.
After trying everything with the X50-5G I see that if you set the "band" option to manual and you select which bands you wish exclusively to use, the X50-5G still connects to the bands that it prefers, even if these bands are not in the selected ones.
For example. I want my X50-5G to connect only to the bands N78, b1, b3, b20. So I select these bands. After a while I see that the X50-5g is connected to band N1 or N28.
The only way for it to stay only in band n78 is to set it in the "cell lock".
The problem is that this is not ideal. In order to set band n78 to cell lock you also need to set the respective PCI.
I have found that band N78 works better in pci 73 only in the evening, but works better in pci 406 during noon.
So I would like to set the X50-5g to lock to band N78 but the PCI to be automatic and change autoimatically during the day according to the best reception and signal.
This should have been done when I select N78 in the "band" option, but as explained, it does not work.
Is this a bug?
Is there a solution to that?
Can I cell lock band N78 and set pci to "auto" somehow?
Many thanks!
P.S.: One thing to note, is that from my local website of TpLink (Greece) the highest available firmware for my X50-5g is firmware build 1.1.3.
But I have installed firmware v1.1.7 (which is only found in the international website) as this was suggested in my Deco app.
Is this problem caused because I don't use the suggested firmware from the local website? Do I need to revert to 1.1.3 ?