Unable to setup Deco S4 mesh network

Unable to setup Deco S4 mesh network

Unable to setup Deco S4 mesh network
Unable to setup Deco S4 mesh network
2024-09-27 17:32:23
Model: Deco S4  
Hardware Version: V4
Firmware Version:

Blue light is flashing, network cable attached to Router and is live, connected to Deco network, sitting next to routrer but keep getting "We couldn't find your Deco".   Tried a different tower but it made no difference.    Help!!   

 

how do I find which Firmware Version I'm using?

  0      
  0      
#1
Options
2 Reply
Re:Unable to setup Deco S4 mesh network
2024-09-29 11:47:07

  @LONTJC 

Hi,

 

Please only power on one Deco unit when you set up the Deco system.

If it still shows 'We couldn't find Deco', please reset the Deco unit.

 

Make sure that you have turned off mobile data, VPN and other apps related to VPN. If you are using iPhone, the local network and location permission should be enabled.

And you can also test with other phone or tablets.

 

If all suggestions above still cannot help, please contact the local support to check the warranty for you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Unable to setup Deco S4 mesh network
2024-09-29 20:52:37
Many thanks. All now working perfectly. The issue was the iPhone settings which I checked and set as per your suggestions. This fix was all that was required.
  0  
  0  
#3
Options