Archer T3U Plus not working after reboot/restart

Archer T3U Plus not working after reboot/restart

Archer T3U Plus not working after reboot/restart
Archer T3U Plus not working after reboot/restart
2024-10-02 19:24:25 - last edited a week ago
Model: Archer T3U  
Hardware Version:
Firmware Version:

This is the T3U Plus I'm talking about. So far it works fine overall, haven't really had time to test it since I just got it. Anyway, I noticed after a reboot it doesn't work, only after I've reinstalled my drivers for it (but that's annoying since I need to input the password to the network again). Any ideas? I've had a WiFi connection previously built into my mobo, but since then it broke and that's why I bought this one. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer T3U Plus not working after reboot/restart-Solution
2024-10-13 09:25:10 - last edited a week ago

  @xReign 

Hi,

 

Is the hardware still detected after you reboot? 

If not, please verify if the checkbox is selected. Remove the checkbox before "Allow the computer to turn off this device to save power". Click OK to return, and restart the computer.

And also test with other USB ports.

 

Besides, you can also install this driver for your adapter: WindowsDriver_1030.44.0408.2024_Drv

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Archer T3U Plus not working after reboot/restart-Solution
2024-10-13 09:25:10 - last edited a week ago

  @xReign 

Hi,

 

Is the hardware still detected after you reboot? 

If not, please verify if the checkbox is selected. Remove the checkbox before "Allow the computer to turn off this device to save power". Click OK to return, and restart the computer.

And also test with other USB ports.

 

Besides, you can also install this driver for your adapter: WindowsDriver_1030.44.0408.2024_Drv

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Archer T3U Plus not working after reboot/restart
23 hours ago
@Sunshine , how do we find newest drivers for Archer T3U Plus? On offical page for V1, drivers are outdated in 2019 and for V1.80 it's dated 2021.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 123

Replies: 2

Related Articles