Two cpl network on same electrical line

Two cpl network on same electrical line

Two cpl network on same electrical line
Two cpl network on same electrical line
2024-10-15 04:39:35
Model: TL-PA9020P KIT  
Hardware Version: V4
Firmware Version:

Hello,

 

I know there are existing topic on this but didn't find answers to all my questions.

 

I understand it is possible to have two pair of powerlines but the network name should be different for each powerline group.

 

My question is, if I plug two powerlines to the router but in separate 2.5ghz ports, will they have their own 2.5ghz line (then 2x2.5ghz) or will they share one time the 2.5ghz?

 

Thanks in advance for your help.

 

  0      
  0      
#1
Options
4 Reply
Re:Two cpl network on same electrical line
2024-10-19 15:59:56

  @Guils 

 

If you plug two different pairs of PLCs to two different LAN ports of your router, you'll have two separate PLC lines whatever their negotiated speed is.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Two cpl network on same electrical line
2024-10-25 11:49:55

  @terziyski 

 

Thanks for your reply.

 

Does it mean they will have their 2.5 ghz bandwith each?

 

Or anyway if they are plugged in different port of the box, they will share the same bandwith, so 2.5 ghz in total?

  0  
  0  
#3
Options
Re:Two cpl network on same electrical line
2024-10-25 12:26:59

  @Guils 

 

if they are plugged in different ports of the router, they will share the same bandwidth, so 2.5 ghz in total.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Two cpl network on same electrical line
2024-10-26 06:31:32

  @terziyski 

 

Well then no need for a second network 😅

 

Thanks for your help!

  0  
  0  
#5
Options